Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC2719
$69.99
(You save)
Keep the front suspension located and the steering tight with the Delphi control arm TC2719, a front right lower control arm and ball joint assembly built as a direct-fit replacement for the 2011-2017 Hyundai Accent. It positions the wheel, allows suspension travel, and lets the wheel pivot for steering through its integrated ball joint.
OE-validated durability: Tested to the extreme — withstands temperatures below -40°C and over 120°C plus 720 hours of salt spray, backed by extensive dimensional and material analysis for OE-to-aftermarket compatibility.
100% inspected: Every arm undergoes crack detection and ultrasonic flaw detection so materials match OE specifications.
Precision joint: Ball studs are machined to micron tolerances for durability and smooth joint operation.
Robot-welded & protected: Robot welding delivers consistent quality, and anti-corrosion protection is applied for corrosion prevention and enhanced appearance.
Common signs this Hyundai Accent lower arm may need replacing include clunking over bumps, loose or wandering steering, and uneven front tire wear — if a worn arm or ball joint is the cause, this assembly replaces it. It covers the front right lower position and is sold individually; order the left side separately if needed.
What vehicle does the Delphi TC2719 control arm fit?
It is a direct-fit replacement for the 2011-2017 Hyundai Accent. See the Buyer's Guide tab to confirm the exact fit for your vehicle.
Where is this Hyundai Accent lower control arm located?
This unit is the front right lower control arm and ball joint assembly. Order the left side separately if you need to service both corners.
Does this Hyundai Accent lower control arm include the ball joint?
Yes. It is a complete control arm and ball joint assembly, so the ball joint is already integrated into the arm.
What are signs my control arm or ball joint may need replacing?
Watch for clunking over bumps, loose or wandering steering, and uneven front tire wear. Diagnose the cause before replacing, since these can have other sources.
Is the Delphi TC2719 tested for durability?
Yes. It undergoes 100% crack and ultrasonic flaw detection, endures temperatures below -40°C to over 120°C and 720 hours of salt spray, which is why buyers reference Delphi control arm reviews with confidence.
Write a Review
Delphi
Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC2719
Bring back tight, quiet steering and control with the Delphi control arm and ball joint assembly (P/N: TC5783), a front right lower unit that carries the OE expertise Delphi builds into millions of...
Locate the front wheel and pivot the steering knuckle with the Delphi control arm TC6296, a front right lower control arm and ball joint assembly that positions the wheel and rides on an integrated,...
Restore precise front-end geometry with the Delphi control arm and ball joint assembly, part number TC1708. This front right upper unit is a direct-fit replacement for the listed applications,...
Tighten up steering response and restore secure wheel location with the Delphi control arm and ball joint assembly (TC805) — a Delphi control arm cataloged for the front right upper and lower...
Cut sloppy steering and restore proper wheel location with the Delphi control arm, part number TC2065 — a direct-fit front left lower rearward assembly for the 2000-2006 BMW X5. This control arm and...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
