Delphi TC6296 front right lower control arm with ball joint for the 1998-2011 Ford Ranger and other vehicles holds the front right wheel to the suspension. As a control arm and ball joint assembly, it pairs the arm with a joint that lets the wheel pivot for steering and move over bumps.
- Delphi tests its parts below -40 degrees C and above 120 degrees C, plus 720 hours of salt spray
- Delphi control arms get 100% crack detection and ultrasonic flaw detection
- Ball studs are machined to micron tolerances for durability and smooth joint operation
- Robot welding of the control arm for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC6296 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 1998-2011 Ford Ranger and other vehicles
- Position: Front right lower
- Condition: New
A clunk over bumps, loose or wandering steering and uneven front tire wear can point to a worn arm or ball joint, but other worn suspension parts produce similar symptoms, so pin down the source before buying. With the engine off, look the arm over for cracks or bends; a shop can test the joint for play.
Fits
The 1998-2011 Ford Ranger takes one arm at the front right; the front left is a separate part ordered on its own, and the two are usually replaced as a pair. The part also fits as a lower control arm for the 1995-2001 Ford Explorer and the 1998-2010 Mazda B4000. Own a different model? Look up its year and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front right lower
- Quantity per vehicle: 1
- Sold as: one arm
Build and materials
- Ball studs: machined to micron tolerances
- Welding: robot welded
- Corrosion protection: anti-corrosion protection on each part
- Inspection: 100% crack and ultrasonic flaw detection
- Condition: New
Interchange: 623.65034 · 520-224 · 2L2Z 3078-BA · 7L5Z 3078-A
CB85154 · CB85154PR · CK620320 · RK620320 · CMS20403 · GS20403 · JTC2371
This part cross-references / interchanges with the following part numbers:
623.65034, 520-224, 2L2Z 3078-BA, 7L5Z 3078-A, CB85154, CB85154PR, CK620320, RK620320, CMS20403, GS20403, JTC2371
Frequently Asked Questions
Is this a suspension control arm for the 1998-2011 Ford Ranger?
Yes. The Delphi TC6296 fits the 1998-2011 Ford Ranger in the front right lower position. The front left lower position takes its own arm.
Is the Delphi TC6296 a Ford Explorer control arm for the 1995-2001 model years?
Yes. The Delphi TC6296 fits the 1995-2001 Ford Explorer at the front right lower position; the front left takes a separate arm.
Which wheel position is this lower control arm for?
This arm is for the front right lower position. The front left lower position uses a separate arm, which is ordered on its own.
Can a clunk over bumps or uneven front tire wear point to a worn control arm with ball joint?
Yes, it can. A clunk over bumps, loose steering or uneven front tire wear can come from a worn arm or ball joint, and a shop can measure the joint for play.
Does the Delphi TC6296 replace number CK620320?
Yes. CK620320 is one of the other numbers the Delphi TC6296 replaces, along with CB85154 and 520-224.
