Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC3293
$125.99
(You save)
Help keep front-end geometry precise and steering controlled with the Delphi control arm TC3293, a front right lower control arm and ball joint assembly. It fits the 2007-2011 Hyundai Santa Fe and 2011-2012 Kia Sorento, locating the wheel while the integrated ball joint allows the steering and suspension to move together. If a clunk on acceleration or bumps, wandering, or uneven tire wear traces back to a worn arm or ball joint, this assembly replaces both in one unit.
OE-derived engineering: built on Delphi's OE expertise, with dimensional and material analysis to align the aftermarket part closely with the original. Tested below -40°C and above 120°C and through 720 hours of salt spray.
Verified materials: 100% crack detection and ultrasonic flaw detection help confirm materials match OE specifications.
Precision ball stud: machined to micron tolerances for durable, smooth joint operation.
Robot-welded and corrosion-protected: consistent welds, plus anti-corrosion protection for corrosion prevention and enhanced appearance.
Whether you are planning a 2011-2012 Kia Sorento lower control arm replacement or need a 2007-2011 Hyundai Santa Fe control arm, diagnose the cause before replacing. Sold individually.
What vehicles does the Delphi TC3293 control arm fit?
It is a direct-fit replacement for the 2007-2011 Hyundai Santa Fe and 2011-2012 Kia Sorento. Full fitment details are in the Buyer's Guide tab.
Is this a front right lower control arm?
Yes. The catalog lists TC3293 in the front right lower position, and it includes the ball joint as one assembly.
Does this control arm include the ball joint?
Yes. The ball joint is integrated into the assembly, so you replace the arm and joint together in a single unit.
What signs suggest this control arm may need replacing?
Clunking on bumps or acceleration, steering wander, or uneven tire wear may point to a worn arm or ball joint. Diagnose the cause before replacing.
How many of these assemblies do I need?
This listing is for one right lower assembly, sold individually. Replacing the left and right sides together as a pair is recommended to help keep suspension response even.
Write a Review
Delphi
Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC3293
Keep the front suspension located and the steering precise with the Delphi Suspension Control Arm and Ball Joint Assembly (TC8449), a front left upper DELPHI control arm that installs as a direct-fit...
Keep the front suspension of your BMW tight and correctly located with the DELPHI control arm and its integrated ball joint, MPN TC9116. This control arm and ball joint assembly is a direct-fit...
Help keep your Mercedes-Benz tracking straight and steering true with the Delphi TC9360 control arm and ball joint assembly — a DELPHI control arm built as a front left lower forward unit that...
Help restore precise wheel location and smooth steering on your 2013-2019 Ford Escape with the Delphi control arm — MPN TC7889. This control arm and ball joint assembly is a direct-fit replacement...
Help keep the front-left-upper suspension tight, quiet, and precise with the DELPHI control arm — the Suspension Control Arm and Ball Joint Assembly TC8859. This unit combines the control arm and its...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
