Front Right Lower Control Arm with Ball Joint for 2011-2018 Volvo S60 & More - Delphi TC3554

$179.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: TC3554
    UPC: 689604284520
    Condition: New
    Weight: 20.74 LBS
    Item Package Quantity: 1
    $179.99
    Adding to cart… The item has been added

    Have questions?

    Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC3554
    Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC3554
    $179.99
    $179.99

    Delphi TC3554 front right lower control arm with ball joint for the 2011-2018 Volvo S60 and other vehicles links the front right wheel to the car and pivots on its ball joint as the suspension moves. This control arm and ball joint assembly replaces the arm and the joint in one piece.

    • Control arm tested at temperatures below -40 degrees C and over 120 degrees C, with 720 hours of salt spray exposure
    • Each Delphi control arm gets 100% crack detection and ultrasonic flaw detection
    • Ball studs machined to micron tolerances for durability and smooth joint operation
    • Robot-welded control arm for consistent performance and quality
    • Anti-corrosion protection applied to the control arm

    Quick facts

    • Part: Delphi TC3554 control arm with ball joint
    • Also called: control arm and ball joint assembly
    • Fits: 2011-2018 Volvo S60 and other vehicles
    • Position: Front right lower
    • Condition: New

    A clunk over bumps, loose steering or uneven tire wear can mean this arm or its ball joint is worn, though a worn sway bar link or strut mount can be behind those signs too, so find the cause first. Front arms are normally replaced as a pair; this listing is one arm for the front right, and the front left is a separate part.

    Fits

    The 2011-2018 Volvo S60, the 2015-2018 Volvo V60 and the 2007-2016 Volvo S80 all fit this arm, and so do other Volvo models. A 2011-2018 Volvo S60 takes one on the front right.

    Specifications

    Fit and size

    • Position: Front right lower
    • Quantity per vehicle: 1

    Build and materials

    • Type: control arm with ball joint
    • Construction: robot-welded arm, ball studs machined to micron tolerances
    • Finish: anti-corrosion protection
    • Condition: New

    Interchange: 102-7751 · 31340127-0
    KSC6184 · CMS101465 · 31340127

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    102-7751, KSC6184, CMS101465, 31340127, 31340127-0

    Frequently Asked Questions

    Is this the right control arm for a 2011-2018 Volvo S60?

    Yes. Delphi TC3554 is the front right lower arm for the 2011-2018 Volvo S60. If your car is a different Volvo, look it up in the "Vehicles it fits" section before you order.

    Will this front right lower control arm work on a 2007-2016 Volvo S80?

    Yes. Delphi TC3554 is the front right lower position for the 2007-2016 Volvo S80, and the front left side is a separate part.

    How are the ball studs on the Delphi TC3554 made?

    The ball studs are machined to micron tolerances for durability and smooth joint operation. The control arm itself is robot welded and has anti-corrosion protection.

    How can I tell if a front lower control arm and its ball joint are worn?

    Look for cracks or rust on the arm, and notice clunks over bumps, loose steering or uneven tire wear while driving. A shop can test the ball joint for play.

    Does Delphi TC3554 replace KSC6184?

    Yes. KSC6184 is one of the cross-reference numbers listed for Delphi TC3554, along with 102-7751 and 31340127-0.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review