Delphi TC5330 front right upper control arm with ball joint for the 2006-2010 Hummer H3 and other vehicles connects the wheel to the chassis. As a control arm and ball joint assembly, it comes with the ball joint already mounted on the arm, so both are replaced as one piece.
- Tested for temperatures below -40 degrees C and over 120 degrees C, and for 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on each control arm
- Ball studs machined to micron tolerances for smooth joint operation
- Robot welding for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC5330 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2006-2010 Hummer H3 and other vehicles
- Position: Front right upper
- Condition: New
A clunk over bumps, uneven front tire wear or loose-feeling steering can mean a worn ball joint or a bent arm. With the engine off, look at the ball joint boot for tears or leaking grease and at the arm for cracks or bends. Tie rod ends and wheel bearings also produce clunks and uneven wear, so track down the source before buying parts.
Fits
It fits the 2006-2010 Hummer H3 and the 2009-2010 Hummer H3T. This listing is one arm for the front right upper position; on that side the 2006-2010 Hummer H3 takes one. The front left upper is a separate part, and the two sides are normally replaced together.
Specifications
Fit and size
- Position: Front right upper
- Quantity per vehicle: 1 for this position
Build and materials
- Type: control arm with ball joint
- Corrosion protection: anti-corrosion protection on each part
- Condition: New
Interchange: 622.69001 · 521-950
15082975 · 19354097 · 22947664 · CB91008 · CB91008PR · CK621675 · RK621675 · CMS501145 · JTC2651
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
622.69001, 521-950, 15082975, 19354097, 22947664, CB91008, CB91008PR, CK621675, RK621675, CMS501145, JTC2651
Frequently Asked Questions
Is the Delphi TC5330 the right control arm for the 2009-2010 Hummer H3T?
Yes. Delphi TC5330 fits the 2009-2010 Hummer H3T and the 2006-2010 Hummer H3, in the front right upper position.
Which position does this upper control arm go in?
It is the front right upper arm. The front left upper arm is a separate part and is ordered on its own.
Does the Delphi TC5330 come with the ball joint?
Yes. Delphi TC5330 is a control arm with the ball joint already on it, and its ball studs are machined to micron tolerances.
How is this Delphi control arm protected against corrosion?
Anti-corrosion protection is applied to each part. Delphi also exposes these parts to 720 hours of salt spray in testing.
What are the signs of a worn front upper control arm or ball joint?
Signs can include a clunk over bumps, uneven front tire wear or loose-feeling steering. A shop can check ball joint play, since that check needs the vehicle lifted.
