Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC1880
Delphi TC5822 front left lower control arm with ball joint for the 1999-2006 Chevrolet Silverado 1500 and other vehicles links the wheel to the frame and carries the ball joint. The ball joint comes attached, so this control arm and ball joint assembly replaces both parts as one piece.
A clunk over bumps, loose steering or uneven front tire wear can mean the arm or its ball joint is worn, though a worn tie rod end or sway bar link can be behind the same signs. This listing is one arm; the front right is a separate part, and both sides are normally replaced together.
This control arm with ball joint fits the 1999-2006 Chevrolet Silverado 1500, the 1999-2006 GMC Sierra 1500 and the 2000-2006 Chevrolet Tahoe, along with a wide range of other Chevrolet, GMC and Cadillac models. If your vehicle is not one of those, pick its year, make and model in the "Vehicles it fits" section to see whether this arm is listed for it.
Fit and size
Build and materials
One front left lower control arm with its ball joint. The front left position takes one, and the front right side is ordered separately.
Interchange: 623.66007 · 520-128
12472817 · 12475479 · CB90064 · CB90064PR · CK620380 · RK620380 · CMS20343 · GS20343 · JTC2432
This part cross-references / interchanges with the following part numbers:
Is this the front left 2000-2006 Chevrolet Tahoe control arm?
Yes. Delphi TC5822 is made for the front left lower position on the 2000-2006 Chevrolet Tahoe, V8-4.8L and V8-5.3L included.
Is this left side one of the 1999-2006 Chevrolet Silverado 1500 control arms?
Yes. Delphi TC5822 fits the front left lower position on the 1999-2006 Chevrolet Silverado 1500. The right side is a separate part.
Does the Delphi TC5822 come with the ball joint already attached?
Yes. This is a control arm with ball joint, so the joint is part of the assembly. The listing is one front left lower arm.
How is this Delphi control arm tested for heat, cold and rust?
Delphi TC5822 withstands temperatures below -40 degrees C and over 120 degrees C in testing and is exposed to 720 hours of salt spray. Anti-corrosion protection is applied to each part.
Does this control arm replace interchange number 520-128?
Yes. Delphi TC5822 replaces 520-128, one of several cross-reference numbers listed with this part.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.