Front Left Lower Control Arm with Ball Joint for 2005-2010 Dodge Dakota & More - Delphi TC5991

$250.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: TC5991
    UPC: 689604324103
    Condition: New
    Weight: 12.03 LBS
    Item Package Quantity: 1
    $250.99
    Adding to cart… The item has been added

    Have questions?

    Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC5991
    Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC5991
    $250.99
    $250.99

    Delphi TC5991 front left lower control arm with ball joint for the 2005-2010 Dodge Dakota and other vehicles connects the front left wheel to the chassis and guides the wheel as the suspension moves. This Delphi control arm is also called a control arm and ball joint assembly, because the ball joint is part of it.

    • Tested at temperatures below -40 degrees C and over 120 degrees C, with 720 hours of salt spray exposure
    • 100% crack detection and ultrasonic flaw detection to check the materials of each control arm
    • Ball studs machined to micron tolerances for durability and smooth joint operation
    • Robot-welded for consistent performance and quality
    • Anti-corrosion protection applied to each part

    Quick facts

    • Part: Delphi TC5991 control arm with ball joint
    • Also called: control arm and ball joint assembly
    • Fits: 2005-2010 Dodge Dakota and other vehicles
    • Position: Front left lower
    • Condition: New

    A clunk over bumps, loose or wandering steering and uneven front tire wear can mean this arm or its ball joint is worn, though a worn sway bar link or tie rod end can produce similar signs, so find the cause before you replace anything.

    Fits

    It is a lower control arm for the 2005-2010 Dodge Dakota, and it also fits the 2011 Ram Dakota and the 2006-2009 Mitsubishi Raider. This listing is one arm for the front left; the front right is a separate part, and both sides are normally replaced together.

    Specifications

    Fit and size

    • Position: Front left lower
    • Quantity per vehicle: 1

    Build and materials

    • Type: control arm with ball joint
    • Ball studs: machined to micron tolerances
    • Construction: robot-welded
    • Finish: anti-corrosion protection
    • Condition: New

    In the box

    One front left lower control arm with ball joint. The front left position takes one.

    Interchange: 102-7043 · 521-147 · 523-078 · 5285 5107AB
    52855107AA · CB81063 · RK620478 · CMS25142 · GS25142 · JTC2338

    This part cross-references / interchanges with the following part numbers:

    102-7043, 52855107AA, 5285 5107AB, 521-147, 523-078, CB81063, RK620478, CMS25142, GS25142, JTC2338

    Frequently Asked Questions

    Is this a front left control arm for the 2005-2010 Dodge Dakota?

    Yes. Delphi TC5991 is a front left lower control arm with ball joint for the 2005-2010 Dodge Dakota. It is sold as one arm, and the right side is a separate part.

    Does Delphi TC5991 come with the ball joint attached?

    Yes. This listing is one front left lower control arm with the ball joint as part of it, so the joint does not need to be bought separately.

    What testing does the Delphi TC5991 control arm go through?

    Delphi TC5991 is built to withstand temperatures below -40 degrees C and over 120 degrees C, and is exposed to 720 hours of salt spray. Each arm also gets crack and ultrasonic flaw detection.

    How can I inspect a control arm with ball joint for wear?

    A shop can inspect the arm for cracks, rust or bends and test the ball joint for play. Both checks need the vehicle properly lifted, so they are best left to a shop.

    Is 523-078 an interchange number for Delphi TC5991?

    Yes. 523-078 is listed as an interchange number for the Delphi TC5991 front left lower control arm with ball joint.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review