Delphi TC8784 front right lower control arm with ball joint for the 2023-2024 Nissan Z and other vehicles locates the front right wheel and carries the steering ball joint. This control arm and ball joint assembly comes as one piece.
- 100% crack detection and ultrasonic flaw detection on each control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding for consistent performance and quality
- Anti-corrosion protection applied to each part
- Withstands temperatures below -40 °C and over 120 °C, plus 720 hours of salt spray exposure
Quick facts
- Part: Delphi TC8784 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2023-2024 Nissan Z and other vehicles
- Position: Front right lower
- Condition: New
A clunk over bumps, uneven tire wear or a wandering steering feel can mean a worn arm or ball joint. Before you replace this arm, rule out a worn tie rod end, strut mount or wheel bearing, since those can feel much alike. This listing is one arm for the front right; the front left is a separate part, and both sides are normally replaced together.
Fits
The vehicles it fits include the 2023-2024 Nissan Z, the 2014-2024 Infiniti Q50 and the 2017-2022 Infiniti Q60, and each takes one on the front right. If your car isn't named here, search your year and model in the "Vehicles it fits" section to see whether it's covered.
Specifications
Fit and size
- Position: Front right lower
- Quantity per vehicle: 1
Build and materials
- Construction: control arm with ball joint
- Finish: anti-corrosion protection
- Condition: New
Interchange: 102-7731 · 54500-1BD1A · 54500-1BD1B · 54500-1BD2B · 54500-JL01A · 54500-JL01B · 54500-JL02B · 54500-JL03B · 54500-JL04B · 54500-JU50A · 522-568
CMS301112
This part cross-references / interchanges with the following part numbers:
102-7731, 54500-1BD1A, 54500-1BD1B, 54500-1BD2B, 54500-JL01A, 54500-JL01B, 54500-JL02B, 54500-JL03B, 54500-JL04B, 54500-JU50A, 522-568, CMS301112
Frequently Asked Questions
Does the Delphi TC8784 fit the 2014-2024 Infiniti Q50?
Yes. Delphi TC8784 is the front right lower control arm with ball joint for the 2014-2024 Infiniti Q50, and one goes on that side.
Which side of the car does this lower control arm go on?
This control arm is for the front right lower position. The front left is a separate part and is ordered on its own.
What is special about the ball studs on this control arm?
The ball studs are machined to micron tolerances, which is meant to give durability and smooth joint operation.
How is this Delphi control arm tested for heat, cold and corrosion?
The part withstands temperatures below -40 °C and over 120 °C and is exposed to 720 hours of salt spray. Anti-corrosion protection is applied to each arm.
Is 54500-JL01A the same part as Delphi TC8784?
Yes. 54500-JL01A is on the interchange list for Delphi TC8784, along with numbers such as 102-7731 and 522-568.
