Front Left Lower Control Arm with Ball Joint for 2019-2025 BMW X7 & More - Delphi TC9014

$212.99
WARNING:California Proposition 65▾
Delphi Suspension Control Arm and Ball Joint Assembly TC9014
Delphi Suspension Control Arm and Ball Joint Assembly TC9014 - view 2
Delphi Suspension Control Arm and Ball Joint Assembly TC9014 - view 3
Delphi Suspension Control Arm and Ball Joint Assembly TC9014 - view 4
Delphi Suspension Control Arm and Ball Joint Assembly TC9014 - view 5
Delphi Suspension Control Arm and Ball Joint Assembly TC9014 - view 6
Delphi Suspension Control Arm and Ball Joint Assembly TC9014 - view 7
Delphi Suspension Control Arm and Ball Joint Assembly TC9014
Delphi Suspension Control Arm and Ball Joint Assembly TC9014 - view 2
Delphi Suspension Control Arm and Ball Joint Assembly TC9014 - view 3
Delphi Suspension Control Arm and Ball Joint Assembly TC9014 - view 4
Delphi Suspension Control Arm and Ball Joint Assembly TC9014 - view 5
Delphi Suspension Control Arm and Ball Joint Assembly TC9014 - view 6
Delphi Suspension Control Arm and Ball Joint Assembly TC9014 - view 7

Vehicles this part fits
    Part number: TC9014
    UPC: 689604401644
    Condition: New
    Weight: 9.00 LBS
    Item Package Quantity: 1
    $212.99
    Adding to cart… The item has been added

    Have questions?

    Ask an Expert
    Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC9014
    Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC9014
    $212.99
    $212.99

    Delphi TC9014 front left lower control arm with ball joint for the 2019-2025 BMW X7 and other vehicles links the wheel to the body and lets it pivot as the suspension moves. This control arm and ball joint assembly replaces the arm and the joint in one piece.

    • Tested to withstand temperatures below -40 degrees C and over 120 degrees C, and 720 hours of salt spray
    • 100% crack detection and ultrasonic flaw detection on each control arm to check the material
    • Ball studs machined to micron tolerances for durability and smooth joint operation
    • Robot-welded control arm for consistent performance and quality
    • Anti-corrosion protection applied to each part

    Quick facts

    • Part: Delphi TC9014 control arm with ball joint
    • Also called: control arm and ball joint assembly
    • Fits: 2019-2025 BMW X7 and other vehicles
    • Position: Front left lower forward
    • Condition: New

    A clunk over bumps or uneven front tire wear can mean the arm or its ball joint is worn. These signs alone do not prove this part is the problem, since a worn tie rod end can make a similar noise. This listing is one arm for the front left; the front right is a separate part, and the two sides are normally replaced together.

    Fits

    The part is listed for a wide range of BMW models, led by the 2019-2025 BMW X7, the 2019-2024 BMW X5 and the 2020-2024 BMW X6. Driving a different BMW? Look up its year and model in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: Front left lower forward
    • Quantity per vehicle: 1 for this position
    • Sold individually

    Build and materials

    • Type: control arm with ball joint, robot-welded
    • Corrosion protection: anti-corrosion protection on each part
    • Condition: New
    • Country of origin: Turkey

    Interchange: 526-295
    31 10 6 893 549 · 31 10 8 866 773 · CMS101578 · X05CJ1440

    This part cross-references / interchanges with the following part numbers:

    31 10 6 893 549, 31 10 8 866 773, 526-295, CMS101578, X05CJ1440

    Frequently Asked Questions

    Does the Delphi TC9014 fit the 2019-2025 BMW X7?

    Yes. Delphi TC9014 is listed for the 2019-2025 BMW X7 in the front left lower forward position, along with other BMW models. Owners of a different BMW can find their year and model in the "Vehicles it fits" section.

    Which position is the TC9014 made for?

    The TC9014 is made for the front left lower forward position, and that side uses one arm. The front right is a separate part ordered on its own.

    Does the TC9014 come with the ball joint already on the arm?

    Yes. Delphi TC9014 is sold as a control arm with its ball joint, so the arm and joint are replaced in one piece. The ball studs are machined to micron tolerances.

    What testing does this Delphi control arm go through?

    These parts are tested against temperatures below -40 degrees C and over 120 degrees C, and 720 hours of salt spray. Each control arm also gets 100% crack and ultrasonic flaw detection.

    How can I tell if a lower control arm ball joint is worn?

    Common signs are a clunk over bumps, a wandering steering feel or uneven front tire wear. A shop can measure joint play, and a worn joint should be checked promptly.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review

    Related Products

    !