Delphi TC982 front left lower control arm with ball joint for the 1999-2002 Infiniti G20 links the wheel to the car and holds the ball joint that lets the wheel pivot. It is also called a control arm and ball joint assembly.
- Control arms get 100% crack detection and ultrasonic flaw detection
- Ball studs are machined to micron tolerances for durability and smooth joint operation
- Robot welding of the control arm for consistent quality
- Anti-corrosion protection applied to each part
- Tested at temperatures below -40 °C and over 120 °C, and for 720 hours of salt spray
Quick facts
- Part: Delphi TC982 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 1999-2002 Infiniti G20
- Position: Front left lower
- Condition: New
A clunk over bumps, uneven tire wear or loose, wandering steering can mean a worn ball joint or arm. Worn tie rod ends, sway bar links, struts or a wheel bearing can be behind these signs too, so pin down which part it is before you buy.
Fits
This front left lower control arm fits the 1999-2002 Infiniti G20. The car takes one arm on each side of the front axle; this listing is the front left one, the front right is ordered separately, and the pair is normally replaced together.
Specifications
Fit and size
- Position: front left lower
- Quantity per vehicle: 1 per side of the front axle
Build and materials
- Construction: robot-welded control arm with ball joint
- Corrosion protection: applied to each part
- Condition: new
Interchange: 101-5439 · 102-5439 · 54501-2F500 · 54501-2J011 · IN-H211 · 52-1569
KSC5674 · CB61013 · CB61013PR · CK621908 · K621908 · K622110 · RK621908 · RK622110 · CMS30110 · GS30110 · MS30110 · JTC1008
This part cross-references / interchanges with the following part numbers:
101-5439, 102-5439, 54501-2F500, 54501-2J011, IN-H211, 52-1569, KSC5674, CB61013, CB61013PR, CK621908, K621908, K622110, RK621908, RK622110, CMS30110, GS30110, MS30110, JTC1008
Frequently Asked Questions
Does the Delphi TC982 control arm fit the 1999-2002 Infiniti G20?
Yes. Delphi TC982 is the front left lower control arm with ball joint for the 1999-2002 Infiniti G20. The front right side is a separate part.
How are the ball studs made on this Delphi front left lower control arm?
The ball studs are machined to micron tolerances, which gives durability and smooth operation of the ball joint.
What testing does this lower control arm with ball joint go through?
Each arm gets 100% crack detection and ultrasonic flaw detection. Delphi steering parts are tested at temperatures below -40 °C and over 120 °C and for 720 hours of salt spray.
What can a worn front lower control arm with ball joint feel like?
A clunk over bumps, uneven tire wear or loose steering can mean a worn ball joint or arm. A shop can test the joint for play.
Does Delphi TC982 replace part number 54501-2F500?
Yes. 54501-2F500 is one of the numbers Delphi TC982, a front left lower control arm with ball joint, replaces.
