Delphi TC6164 front upper control arm with ball joint for the 2003 Dodge Ram 2500 V10 8.0L, the 2003-2005 Ram 2500 V8 5.7L or 6-cylinder 5.9L and other vehicles links the wheel end to the chassis and lets the wheel pivot. Sold as a control arm and ball joint assembly, it combines the arm and its ball joint in one piece.
- Withstands temperatures below -40 degrees C and over 120 degrees C, and 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on every control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded arm for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC6164 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2003 Dodge Ram 2500 V10 8.0L, the 2003-2005 Ram 2500 V8 5.7L or 6-cylinder 5.9L and other vehicles
- Position: Front upper
- Condition: New
A clunk over bumps, loose or wandering steering, or uneven tire wear can mean a worn ball joint or a damaged arm. Worn tie rod ends, shocks, wheel bearings or suspension bushings can produce similar symptoms, so find the cause before you buy.
Fits
It also fits the 2003 Dodge Ram 3500 V10 8.0L and the 2003-2005 Ram 3500 V8 5.7L or 6-cylinder 5.9L. The quantity per truck is two. This listing is one piece, and both sides are normally replaced together.
Specifications
Fit and size
- Position: front upper
- Quantity per vehicle: 2
- Sold: one per listing
Build and materials
- Type: control arm with ball joint
- Construction: robot-welded arm, ball studs machined to micron tolerances
- Finish: anti-corrosion protection on each part
- Condition: new
Interchange: 520-199 · 52106 776AE
522638 · CB81126 · CB81126PR · CK7462 · RK7462 · CMK7462 · GK7462
This part cross-references / interchanges with the following part numbers:
52106 776AE, 520-199, 522638, CB81126, CB81126PR, CK7462, RK7462, CMK7462, GK7462
