Delphi TC1483 front left lower control arm for the 2004-2008 BMW X3 connects the front left wheel to the chassis and lets the suspension move. This Delphi control arm replaces a worn or damaged arm at that position.
- Tested to withstand temperatures below -40 degrees C and over 120 degrees C, with 720 hours of salt spray exposure
- 100% crack detection and ultrasonic flaw detection on every control arm
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC1483 control arm
- Also called: suspension control arm
- Fits: 2004-2008 BMW X3
- Position: Front left lower forward
- Condition: New
A worn suspension control arm can bring a clunk over bumps or uneven front tire wear. Other worn front-end parts can give similar symptoms, so inspect the arm with the engine off for cracks, bends or rust first. This listing is one arm; the front right is a separate part, and both are normally replaced together.
Fits
This direct-fit 2004-2008 BMW X3 control arm replacement goes on the front left lower forward position.
Specifications
Fit and size
- Position: Front left lower forward
- Quantity for this side: 1
Build and materials
- Condition: New
- Construction: robot welded
- Finish: anti-corrosion protection
In the box
One control arm for the front left lower forward position; the 2004-2008 BMW X3 takes one on this side.
This part cross-references / interchanges with the following part numbers:
3110 0363 477, 3110 3412 137, 3110 3443 127, 101-6750, 102-6750, 102-6751, 102-7525, 622.34866, BW-H243, 521-261, CA14193, CA14193PR, CK620111, CK623105, K620111, RK620111, RK623105, FA3418, CMS10196, 507-1870, JTC1128, JTC1450
Frequently Asked Questions
Is this the right 2004-2008 BMW X3 control arm for the front left side?
Yes. Delphi TC1483 is the front left lower forward control arm for the 2004-2008 BMW X3.
What comes in the Delphi TC1483 listing?
This listing holds one control arm for the front left lower forward position. The front right side is a separate part.
How is this Delphi control arm checked for flaws?
Every control arm goes through 100% crack detection and ultrasonic flaw detection, so the materials match OE specifications.
Can a worn front left lower control arm make the car pull to one side?
Yes, it can be one sign of pulling, and steering that feels loose or wanders is another.
Does the Delphi TC1483 control arm have corrosion protection?
Yes. Anti-corrosion protection is applied to each Delphi TC1483 control arm, and the part is exposed to 720 hours of salt spray in testing.
