Delphi Suspension Stabilizer Bar Link Kit P/N:TC1211
$26.99
(You save)
Keep body roll in check and your front suspension responding predictably with the Delphi Suspension Stabilizer Bar Link Kit (P/N TC1211). This front-right sway bar link ties the stabilizer bar to the suspension so both wheels work together through corners, and it drops in as a direct-fit replacement for the 2001-2003 Acura CL, 1999-2003 Acura TL and 1998-2002 Honda Accord — see the Buyer's Guide tab for engine-level fitment.
Delphi carries its OE engineering into its aftermarket steering and suspension line, running dimensional and material analysis to keep the aftermarket part matched to the original.
Endurance tested: validated below -40°C and above 120°C and through 720 hours of salt spray.
Fatigue tested: links are fatigue tested to guard against premature failure.
Ultrasonic molding: built to help prevent future weld breakage.
Micron-tolerance machining: for durability and smooth joint operation, with anti-corrosion protection applied to each part.
Worn links often announce themselves with a knock or rattle from the front of the vehicle over bumps and loose, vague handling; if a failed stabilizer bar link is the cause, this replaces it.
It connects the stabilizer (sway) bar to the suspension, helping tie the left and right sides together so the bar can resist body roll and keep handling more stable through turns.
Which vehicles does the Delphi TC1211 fit?
It's a direct-fit replacement for the 2001-2003 Acura CL, 1999-2003 Acura TL and 1998-2002 Honda Accord. Check the Buyer's Guide tab for engine-level fitment details.
What position is this link for?
This kit is cataloged for the front-right position. Sway bar links are commonly replaced in pairs, so consider ordering the matching side for balanced handling.
What are the signs a sway bar link may need replacing?
Common signs include a knocking or rattling noise from the front over bumps and loose, vague steering feel. Have the suspension inspected, since other parts can cause similar symptoms.
How is this Delphi link tested for durability?
Delphi fatigue tests its links and validates them below -40°C, above 120°C and through 720 hours of salt spray, and uses micron-tolerance machining with anti-corrosion protection on each part.
Write a Review
Delphi
Delphi Suspension Stabilizer Bar Link Kit P/N:TC1211
Keep your front sway bar working with the body to limit roll and steady the ride using the Delphi Suspension Stabilizer Bar Link Kit, MPN TC2212. This front right sway bar link connects the...
Keep body roll in check and reconnect your stabilizer bar to the suspension with the Delphi Suspension Stabilizer Bar Link Kit TC5002. This front sway bar link fits the 2001-2006 Hyundai Elantra and...
Keep the stabilizer bar tied into the suspension and body roll in check with the Delphi Suspension Stabilizer Bar Link Kit (TC1104), a direct-fit sway bar link cataloged for the front-left and...
Tie the front stabilizer bar back to the suspension with the Delphi Suspension Stabilizer Bar Link Kit (TC2640). Delphi applies its OE engineering to the aftermarket steering and suspension...
Keep your sway bar working with the wheels and quiet the clunks of a worn link using the Delphi Suspension Stabilizer Bar Link Kit (TC2882). This FRONT stabilizer bar link kit is a direct-fit...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
