Keep body roll in check and your rear stabilizer bar tied into the suspension with the Delphi Suspension Stabilizer Bar Link Kit TC2535. This rear stabilizer bar link kit connects the rear stabilizer (sway) bar to the suspension so the bar can resist lean through corners. It drops in as a direct-fit replacement across a wide range of BMW models — including the 2011-2016 528i, 2011-2016 535i, 2011-2016 550i, 2012-2018 640i, 2012-2018 650i, 2012-2015 740i, 2009-2015 750Li, and 2012-2014 ALPINA B7 — with 33 total applications, so see the Buyer's Guide tab for the full list.
Delphi applies its OE engineering to this aftermarket steering and suspension line, testing parts below -40°C and over 120°C and exposing them to 720 hours of salt spray, with dimensional and material analysis for close compatibility between the OE and aftermarket part. Worn links often announce themselves with clunks or rattles from the rear over bumps; if a failed link is the cause, this kit replaces it.
Interchange: 3355 6777 635 · 101-6968 · BW-P101
33556777635 · 1016968 · BWP101 · LS03046 · SL14675 · SL14675PR · K750408 · SL985 · MS10898 · JTS1643
This part cross-references / interchanges with the following part numbers:
What is a stabilizer bar link kit and what does this part do?
It connects the rear stabilizer (sway) bar to the suspension so the bar can resist body lean when cornering. This kit is the rear stabilizer bar link for the listed BMW applications.
Does this kit fit the front or rear of the vehicle?
It is cataloged as a REAR stabilizer bar link kit for the listed applications.
Which vehicles does the Delphi TC2535 fit?
It fits 33 BMW applications, including the 2011-2016 528i, 2012-2018 640i, 2012-2018 650i, and 2009-2015 750Li. See the Buyer's Guide tab for the complete list and to confirm your vehicle.
What are the signs my sway bar link may need replacing?
Clunking, knocking, or rattling from the rear when driving over bumps can be a sign of a worn link. Diagnose the cause first, since other suspension parts can produce similar noises.
How is this Delphi link protected against corrosion?
Anti-corrosion protection is applied to each part for corrosion prevention and enhanced aesthetics, and Delphi exposes its parts to 720 hours of salt spray during testing.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
