DENSO Auto Parts Oxygen Sensor P/N:234-3005
DENSO Auto Parts 234-4007 oxygen sensor for the 1991-1994 Plymouth Laser 4-cylinder 2.0L and other vehicles reports exhaust oxygen to the engine computer. This DENSO Auto Parts oxygen sensor is a heated, narrow-band upstream unit with a direct-fit design.
A failing oxygen sensor can show up as a check engine light, a rough idle or poorer fuel economy, though other faults can trigger them too. Start with a look at the sensor wiring and connector with the engine off and cool, checking for cuts, melted insulation or corrosion. If the sensor itself is the cause, this one replaces it.
Vehicles this sensor fits include the 1991-1994 Plymouth Laser 4-cylinder 2.0L, the 1991-1994 Eagle Talon 4-cylinder 2.0L and the 1991-1994 Mitsubishi Eclipse 4-cylinder 2.0L, all with the L4-2.0L engine. If your car is not named here, find your year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One oxygen sensor. The 4-cylinder 2.0L engine in these cars takes one upstream sensor.
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the oxygen sensor for the 1991-1994 Mitsubishi Eclipse 4-cylinder 2.0L?
Yes. DENSO Auto Parts 234-4007 fits the 1991-1994 Mitsubishi Eclipse with the L4-2.0L engine. For other cars, look up your year and engine in the "Vehicles it fits" section.
Is this the Laser oxygen sensor for the 1991-1994 Plymouth Laser 4-cylinder 2.0L?
Yes. This listing is one upstream sensor, and the 1991-1994 Plymouth Laser with the L4-2.0L engine takes one.
How long is the wire on the DENSO 234-4007 oxygen sensor?
The wiring harness on DENSO Auto Parts 234-4007 is 29.80 inches long. It has 4 wires and a male connector, and the sensor threads in with a 0.708 inch thread diameter.
Does this oxygen sensor protect against silicone and lead contamination?
Yes. Its aluminum oxide trap layer is designed to protect the ceramic element from silicone and lead poisoning, and a PTFE filter blocks other contaminants.
Which symptoms can a worn upstream oxygen sensor cause?
A failed emissions test, rough running or higher fuel use can come from a worn upstream sensor. Other problems can look the same, so a shop can test the sensor to confirm.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.