DENSO Auto Parts Oxygen Sensor P/N:234-4041
DENSO Auto Parts 234-4218 oxygen sensor for the 2009-2014 Honda Fit 4-cylinder 1.5L and other vehicles senses exhaust oxygen after the catalytic converter. The reading goes to the engine computer.
A failing oxygen sensor can show up as a check engine light, lower fuel economy or a rough idle. Before you replace the sensor, rule out wiring damage, an exhaust leak near it and any other source of the same code.
For oxygen sensor replacement on the 2009-2014 Honda Fit 4-cylinder 1.5L or the 2010-2011 Honda Insight 4-cylinder 1.3L, this DENSO Auto Parts oxygen sensor is a direct-fit part, and each of them takes one.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a 2009-2014 Honda Fit 4-cylinder 1.5L oxygen sensor?
Yes. DENSO Auto Parts 234-4218 is a downstream oxygen sensor that fits the 2009-2014 Honda Fit 4-cylinder 1.5L, which takes one.
Is this the oxygen sensor for a 2010-2011 Honda Insight 4-cylinder 1.3L?
Yes. This downstream oxygen sensor fits the 2010-2011 Honda Insight 4-cylinder 1.3L, which takes one.
What connector and wire length does this DENSO Auto Parts oxygen sensor have?
DENSO Auto Parts 234-4218 has a 4-wire female connector and a 31.61 in wiring harness.
What does the aluminum oxide trap layer do in this oxygen sensor?
This trap layer is DENSO's exclusive aluminum oxide layer, designed to protect the ceramic element from silicone and lead poisoning.
Is this oxygen sensor threaded, and what size?
Yes. This oxygen sensor has a threaded mount with a 0.708 in thread diameter.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.