DENSO Auto Parts Oxygen Sensor P/N:234-4606
DENSO Auto Parts 234-4329 oxygen sensor for the 2004-2009 Mazda 3 4-cylinder 2.0L, the 2006-2009 3 4-cylinder 2.3L and other vehicles monitors the oxygen in the exhaust from the downstream position. It is a heated, narrow-band sensor with four wires and a threaded mount.
A worn oxygen sensor can show up as a check engine light, poorer fuel economy or a rough idle. A failing catalytic converter, an exhaust leak or a wiring fault can be behind the same signs, so find the cause before you buy a sensor. This listing is one sensor, and the 2004-2009 Mazda 3 4-cylinder 2.0L and the 2006-2009 3 4-cylinder 2.3L take two.
It is a direct-fit oxygen sensor replacement for the 2004-2009 Mazda 3 4-cylinder 2.0L and the 2006-2009 3 4-cylinder 2.3L. It also fits the 2006-2008 Mazda 6 4-cylinder 2.3L and is an oxygen sensor for the 2011-2014 Mazda 2 4-cylinder 1.5L.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this an oxygen sensor for the 2006-2008 Mazda 6 4-cylinder 2.3L?
Yes. DENSO Auto Parts 234-4329 is a downstream oxygen sensor for the 2006-2008 Mazda 6 4-cylinder 2.3L, and that car takes one.
Is this oxygen sensor right for a 2008 Mazda 3 in the 2004-2009 4-cylinder 2.0L or 2006-2009 4-cylinder 2.3L ranges?
Yes. A 2008 model falls inside both engine ranges, and the 2004-2009 Mazda 3 4-cylinder 2.0L and the 2006-2009 3 4-cylinder 2.3L take two each.
Is the DENSO 234-4329 oxygen sensor heated, and how many wires does it have?
Yes. DENSO Auto Parts 234-4329 is a heated narrow-band sensor with four wires and a female connector. Its wiring harness is 32.48 in long.
Can a worn heated downstream oxygen sensor change fuel economy?
Yes. A worn sensor can show up as a check engine light, poorer fuel economy or a rough idle, and a shop can read the codes and test the sensor.
What does the aluminum oxide trap layer in this DENSO oxygen sensor do?
The aluminum oxide trap layer is designed to protect the ceramic element from silicone and lead poisoning. The laser-welded stainless housing resists corrosion, and the PTFE filter blocks contaminants.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.