DENSO Auto Parts Oxygen Sensor P/N:234-4804
DENSO Auto Parts 234-4458 oxygen sensor for the 2011-2013 Kia Sorento V6 3.5L, the 2014-2018 Sorento V6 3.3L and other vehicles measures the oxygen in the exhaust so the engine computer can adjust the fuel mixture. The DENSO Auto Parts oxygen sensor is precision built as an exact replacement, so it fits the first time.
A failing oxygen sensor can show up as a check engine light, a rough idle or poorer fuel economy. Before you replace the sensor, rule out an exhaust leak, a wiring fault or a misfire, since each of those can set off similar symptoms.
This direct-fit Kia Sorento oxygen sensor replacement covers the 2011-2013 V6 3.5L and the 2014-2018 V6 3.3L. It also fits the 2010-2012 Hyundai Santa Fe V6 3.5L, the 2013-2018 Santa Fe V6 3.3L and the 2013-2019 Hyundai Santa Fe XL V6 3.3L. This listing is one sensor for the upstream position, and each of these cars takes one there. If your car is not one of these, look it up by year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a Hyundai Santa Fe oxygen sensor for a 2013-2018 model with the V6 3.3L?
Yes, DENSO Auto Parts 234-4458 fits the 2013-2018 Hyundai Santa Fe V6 3.3L and the 2010-2012 Santa Fe V6 3.5L. It is an upstream sensor, and each takes one.
Is this the oxygen sensor for a 2014-2018 Kia Sorento V6 3.3L?
Yes, the 2014-2018 Kia Sorento V6 3.3L takes one, and the 2011-2013 Sorento V6 3.5L fits too. For other years or engines, check the "Vehicles it fits" section.
How long is the wire harness on the DENSO Auto Parts 234-4458 oxygen sensor?
The wiring harness is 12.60 in long, with 4 wires and a male connector. DENSO Auto Parts 234-4458 mounts by thread, and the thread diameter is 0.708 in.
Is this oxygen sensor heated, and what type is it?
Yes, it is a heated sensor, and it is a narrow-band type. It has 4 wires.
What does the aluminum oxide trap layer do in this oxygen sensor?
The aluminum oxide trap layer is designed to protect the ceramic element from silicone and lead poisoning. A PTFE filter also blocks contaminants in harsh engine conditions.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.