DENSO Auto Parts Oxygen Sensor P/N:234-4850
DENSO Auto Parts 234-4855 right oxygen sensor for the 2006-2010 Hyundai Sonata V6 3.3L and other vehicles measures the oxygen in the exhaust and reports it to the engine computer. This DENSO Auto Parts oxygen sensor is a heated, narrow-band, direct-fit unit with four wires.
A check engine light, a drop in fuel economy or rough running can mean the oxygen sensor is worn, though an exhaust leak or a damaged connector can sit behind the same signs, so find the cause before you replace it.
As a direct-fit replacement, this sensor suits the 2007-2009 Kia Sorento V6 3.8L, the 2008-2009 Sorento V6 3.3L, the 2006-2011 Hyundai Azera V6 3.8L and the 2007-2011 Azera V6 3.3L, along with the Sonata named above. The 2006-2010 Hyundai Sonata V6 3.3L takes one sensor on this side, and the sensor for the other side is ordered separately. If your vehicle is not named here, look it up in the "Vehicles it fits" section on this page.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a Kia Sorento oxygen sensor for the 2007-2009 Sorento V6 3.8L and the 2008-2009 Sorento V6 3.3L?
Yes. DENSO Auto Parts 234-4855 is the downstream right sensor for the 2007-2009 Kia Sorento V6 3.8L and the 2008-2009 Sorento V6 3.3L. For another vehicle, use the "Vehicles it fits" section.
Will this work as a 2006 Hyundai Sonata oxygen sensor on the V6 3.3L?
Yes. DENSO Auto Parts 234-4855 fits the 2006-2010 Hyundai Sonata V6 3.3L, so a 2006 model is covered. It is the downstream right sensor, and the Sonata takes one on that side.
What thread size and wire length does the DENSO 234-4855 oxygen sensor have?
The thread diameter is 0.708 in and the wiring harness is 32.28 in long. It has four wires, a male connector and threaded mounting.
What can a worn downstream right oxygen sensor look like?
A check engine light, lower fuel economy or rough running can mean the sensor is worn. With the engine off and cool, you can look the wiring over for damage, and a shop can test the sensor itself.
What does the aluminum oxide trap layer in this DENSO oxygen sensor do?
This layer is designed to keep silicone and lead poisoning away from the ceramic element. A PTFE filter also blocks contaminants, and the stainless housing is laser welded to resist corrosion.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.