Give each rear wheel's lug nut a solid threaded anchor with the Dorman wheel lug stud 610-194 from Dorman - Autograde, a 9/16-18 serrated stud designed to help hold the wheel firmly against the hub. It fits many vehicles as a direct-fit replacement for the listed applications, among them the 1979-1986 GMC C3500, 1975-1999 Chevrolet P30 and 1979-1999 GMC P3500. See the Buyer's Guide tab for the full list.
This rear wheel lug stud is made of carbon steel and tested to demanding automotive industry standards for strength, longevity and safety.
Specifications: 9/16-18 thread, serrated knurl of 0.621 in., overall length of 3-17/32 in.
The serrated knurl is pressed into the flange to hold the stud against turning, and the threaded end accepts the lug nut. Stripped or damaged threads, a bent, stretched or broken stud, or a lug nut that will not tighten properly are signs a stud may need replacing. Follow the vehicle service information for the installation procedure and lug nut torque.
Interchange: 560-461
560461 · 6025 · B142190 · B142190CVS · 355815 · 92488 · 97125 · 5741B · RB5741B · BD61393
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Dorman 610-194 wheel lug stud fit?
It fits many vehicles, among them the 1979-1986 GMC C3500, 1975-1999 Chevrolet P30 and 1979-1999 GMC P3500. Check the Buyer's Guide tab to confirm your exact vehicle.
What are the specifications of this wheel stud?
It is a 9/16-18 serrated wheel stud with a 0.621 in. knurl and an overall length of 3-17/32 in. It is made of carbon steel that meets SAE standards for strength and hardness.
What does a wheel lug stud do?
The stud is anchored in the flange and gives the lug nut a threaded post to clamp the wheel against the hub. This stud is cataloged for the rear position on the listed applications.
What are signs a wheel lug stud may need replacing?
Stripped or damaged threads, a stud that is bent, stretched or broken, or a lug nut that will not tighten properly are common signs a wheel stud may need replacing.
How is this serrated wheel stud installed?
The serrated knurl is pressed into the flange to hold the stud against turning. Follow the vehicle service information for the procedure and the correct lug nut torque.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
