Dorman - Autograde Wheel Lug Stud P/N:610-025.1
Keep your front wheels clamped down on fresh threads with this Dorman wheel lug stud, part number 610-273 from the Dorman - Autograde line. This front wheel stud is a direct-fit replacement for the 1977-1983 Jeep CJ5, 1977-1986 Jeep CJ7 and 1981-1985 Jeep Scrambler (All engines). It comes as a package of 10 studs.
This 1/2-20 serrated wheel stud uses SAE right-hand (clockwise) threads. Its serrated knurl presses into the wheel hub to hold the stud in place, and the lug nut threads onto it to clamp the wheel. The studs are tested to demanding automotive industry standards for strength.
Specifications: 1/2 in thread diameter with 20 threads per inch, 1.63 in (1-5/8 in) under-head length, 0.883 in thread length, 0.656 in shoulder length and 0.81 in head diameter. Silver in color, with no quick-start nose. Country of origin: United States.
A wheel stud may need replacing if its threads are stripped or damaged, if it is bent or broken, or if it spins in the hub instead of holding tight when the lug nut is torqued. After installation, tighten the lug nuts to the vehicle's specified torque.
Interchange: 560-187
560187 · B142199 · 5357196 · J5357196 · 97198 · 3167B · RB3167B · BD61095
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What vehicles does the Dorman 610-273 wheel lug stud fit?
It is listed as a front wheel stud for the 1977-1983 Jeep CJ5, 1977-1986 Jeep CJ7 and 1981-1985 Jeep Scrambler (All engines).
What thread size is this wheel stud?
It has a 1/2-20 SAE thread (1/2 in diameter, 20 threads per inch) with a right-hand (clockwise) thread direction and a 0.883 in thread length.
How many studs come in the package?
The package contains 10 wheel studs.
What is this wheel lug stud made of?
It is made of steel that meets SAE automotive industry standards for strength and hardness. It has also been through salt spray testing for corrosion resistance.
How do I know if a wheel lug stud needs replacing?
Common signs include stripped or damaged threads, a bent or broken stud, or a stud that spins in the hub when the lug nut is tightened. If a damaged stud is the cause, this part replaces it.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.