Dorman - Autograde Wheel Lug Stud P/N:610-448.1
Replace a stripped, broken or spun wheel stud with this Dorman wheel lug stud, part number 610-448 from the Dorman - Autograde line. It is a 1/2-20 serrated stud that gives the lug nut a threaded anchor for clamping the wheel in place, and it is made of carbon steel tested to demanding automotive industry standards for strength and safety. It fits many vehicles, among them the 2007-2017 Jeep Wrangler, 2002-2010 Jeep Grand Cherokee and 2018 Jeep Wrangler JK, and it is cataloged for both front and rear wheel positions on the listed applications.
A stud with damaged threads, a stud that has snapped or bent, or a stud that spins when the lug nut is turned may need replacing. The serrated knurl is designed to grip the flange the stud is pressed into. Wheel studs are safety-related parts, so follow the vehicle service information for the installation procedure and lug nut torque. See the "Vehicles it fits" section for the full list of applications.
Interchange: B142351 · 6036424AA · 68003287AA · 28912B · RB28912B · BD142989
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does a wheel lug stud do?
It is the threaded stud the lug nut tightens onto, which clamps the wheel in place. The Dorman 610-448 has a serrated knurl that grips the flange it is pressed into.
What size is the Dorman 610-448 wheel stud?
It is a 1/2-20 serrated wheel stud with a .667 in. knurl and a length of 1-15/16 in.
Will this wheel stud fit my 2007-2017 Jeep Wrangler?
It is listed for the 2007-2017 Jeep Wrangler and the 2018 Jeep Wrangler JK at both front and rear wheel positions. It also fits the 2002-2010 Jeep Grand Cherokee. Check the "Vehicles it fits" section for your vehicle.
What are signs a wheel lug stud may need replacing?
Stripped or cross-threaded threads, a broken or bent stud, or a stud that spins in the hub when the lug nut is turned are common signs a stud may need replacing.
What is this wheel stud made of and how is it tested?
It is made of carbon steel that meets SAE standards for strength and hardness. The studs go through proof-load testing for strength and salt spray testing for rust resistance.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.