Dorman - First Stop Brake Hydraulic Hose P/N:H380487
Keep pressurized brake fluid flowing to the front right wheel with the Dorman brake hydraulic hose H620624 from the First Stop line. It is a direct-fit replacement for the 2004-2006 Ford E-150 and the 2004-2005 Ford E-150 Club Wagon. This flexible hose links the rigid brake line to the brake at the wheel and carries fluid as the suspension and steering move.
Dorman engineered this hose to perform like the original brake hose on the specific vehicles and position it covers. That makes it a sound part of a complete brake repair.
Signs this hose may need replacing include cracked or swollen rubber, fluid seeping at the hose or its fittings, or a soft brake pedal. These symptoms can have other causes, so diagnose the brake system before replacing parts. The brakes must be bled after installation. Consult the vehicle service information for the correct fasteners and any sealing washers, and whether they may be reused. Full application details are in the "Vehicles it fits" section.
Interchange: 150.65165 · 350-54394
611850 · 4C2Z2078AE · 6C2Z2078AA · BH382695 · 2204713 · BH141208 · F141208 · 15065165 · 35054394
This part cross-references / interchanges with the following part numbers:
Which vehicles and position does the H620624 brake hose fit?
It fits the front right position on the 2004-2006 Ford E-150 and the 2004-2005 Ford E-150 Club Wagon. See the "Vehicles it fits" section for full application details.
What does a brake hydraulic hose do?
It is the flexible link between the rigid brake line and the brake at the wheel. It carries pressurized brake fluid while allowing for suspension and steering movement.
What is this brake hose made of?
It is made with EPDM rubber and has specially coated, corrosion-resistant fittings. Its materials are tested to exacting government-regulated safety and durability standards.
What are signs a brake hose may need replacing?
Cracked, swollen or bulging rubber, fluid leaking at the hose or fittings, or a soft pedal can point to a worn hose. These signs can have other causes, so diagnose the brake system first.
Do I need to bleed the brakes after installing it?
Yes. Bleed the brakes after installation, and check the vehicle service information for the correct fasteners and any sealing washers, and whether they can be reused.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.