Dorman - First Stop Brake Master Cylinder P/N:M390016
Turn pedal effort into the hydraulic pressure your brakes depend on with the Dorman First Stop Brake Master Cylinder M390392. It is a direct-fit replacement for the 1994-2002 Ford E-150 Econoline, the 1994-2002 Ford E-150 Econoline Club Wagon, the 2003 Ford E-150 and the 2003 Ford E-150 Club Wagon (Engine: All). Dorman engineers this unit to mirror the original master cylinder's design, function and performance. It is built from new, high-quality materials for a safe, durable replacement.
Signs that a master cylinder may need replacing include a soft or sinking brake pedal, brake fluid leaking at the master cylinder, a steadily dropping reservoir level, and an illuminated brake warning light. Other brake components can cause similar symptoms, so diagnose the system first. If the master cylinder is at fault, M390392 replaces it. Consult the vehicle service information for the correct fasteners and whether the originals may be reused. Bleed the brake system as the service procedure directs.
Interchange: 83-42049 · 100-2547 · M-85049 · 13-2794 · 10-2794 · 130.65049 · 131.65049 · 355-54168
8342049 · 1002547 · M85049 · 132794 · 102794 · 13065049 · 13165049 · 35554168 · 18M812 · M901047 · 13283 · 13695 · MC252260 · 1C2Z2140AA · 2C2Z2140BA · F7UZ2140RB · F8UZ2140BA · YC2Z2140BA · M3047 · M4095 · NM3047 · NM4095 · MC390392 · F140639 · MC140639
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Dorman M390392 fit?
It fits the 1994-2002 Ford E-150 Econoline and Ford E-150 Econoline Club Wagon, plus the 2003 Ford E-150 and Ford E-150 Club Wagon (Engine: All).
Is a reservoir included with this master cylinder?
Yes, the reservoir and a sensor are both included. Mounting hardware is not included, so consult the vehicle service information for the correct fasteners and whether the originals may be reused.
What is the M390392 housing made of?
The cylinder housing is aluminum, built to match the material of the original part. All rubber components use an EPDM compound that resists glycol-based brake fluid.
What are the bore and outlet specifications?
The bore diameter is 1.125 in and there are 2 outlets. The primary outlet has a 1.5 mm thread pitch, and the secondary outlet thread diameter is M18 x 1.5.
What are signs a brake master cylinder may need replacing?
Possible signs include a soft or sinking pedal, fluid leaking at the master cylinder, or a dropping reservoir level. Other brake parts can cause similar symptoms, so diagnose the system first.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.