Dorman - First Stop Brake Master Cylinder P/N:M39590
Send hydraulic pressure from the pedal to every brake circuit with the Dorman brake master cylinder M390430 from the Dorman - First Stop line. It is a direct-fit replacement for the 1997 Ford Crown Victoria, 1997 Lincoln Town Car and 1997 Mercury Grand Marquis with all engines.
This Dorman master cylinder is designed to match the original master cylinder's design, function and performance on the listed applications. It is made from new, high-quality materials for a durable replacement.
Specifications: 1 in bore diameter, three outlets and an M18 x 1.0 secondary outlet thread. The reservoir and a sensor are included. Mounting hardware is not included, so consult the vehicle service information for the correct fasteners and whether the originals may be reused. Country of origin: Taiwan.
A soft or sinking brake pedal, brake fluid leaking around the unit, or a lit brake warning light are signs a master cylinder may need replacing. Other brake components can cause the same symptoms, so diagnose the cause before you replace it. Bench-bleed the new unit and bleed the brake system as directed by the service procedure.
Interchange: 100-3063 · 10-2758 · 130.61098 · 355-56015 · BRMC-72
18M849 · M901075 · M81098 · 13472 · MC510290 · F7AZ2140BA · NM2758 · NM2758A · MC390430 · F140492 · MC140492 · 1003063 · 102758 · 13061098 · 35556015 · BRMC72
This part cross-references / interchanges with the following part numbers:
Is this the right brake master cylinder for a 1997 Lincoln Town Car?
Yes. It is listed as a direct-fit replacement for the 1997 Lincoln Town Car with all engines.
What does a brake master cylinder do?
It converts the force you put on the brake pedal into hydraulic pressure. It then sends brake fluid through its outlets to the vehicle's brake circuits.
What comes in the box?
One master cylinder, with the reservoir and a sensor included. Mounting hardware is not included, so consult the vehicle service information for the correct fasteners.
What are the key specifications?
It has an aluminum housing, a 1 in bore, three outlets and an M18 x 1.0 secondary outlet thread. Its rubber components use an EPDM compound that resists glycol-based brake fluid.
What should I know before installing it?
Bench-bleed the master cylinder before installation, then bleed the brake system as directed by the vehicle's service procedure. Diagnose the cause of any brake symptom before replacing parts.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.