Dorman - First Stop Brake Master Cylinder P/N:M630561
Dorman M39999 brake master cylinder for the 1990-1992 Toyota Land Cruiser turns pedal force into hydraulic pressure for the brakes. The Dorman brake master cylinder housing is constructed to match the casting material of the original part, so performance stays similar.
A brake pedal that sinks toward the floor or feels soft, or brake fluid showing at the cylinder, can mean the master cylinder is worn. Before you replace it, rule out leaking brake lines, calipers or wheel cylinders and air in the system, since those can give similar pedal symptoms. A shop can pressure-test the system.
This master cylinder fits the 1990-1992 Toyota Land Cruiser.
Fit and size
Build and materials
This listing is one master cylinder with its reservoir and sensor; the 1990-1992 Toyota Land Cruiser takes one. Mounting hardware is not included, so plan on new fasteners rather than reusing the old ones.
Interchange: 100-4078 · 072-8801 · 13-3153 · 130.44707
18M542 · M900748 · 12591 · MC252610 · MC39999 · 4720160410 · F118404 · F122263 · MC122263
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the master cylinder for the 1990-1992 Toyota Land Cruiser?
Yes. Dorman M39999 is a brake master cylinder that fits the 1990-1992 Toyota Land Cruiser, and the vehicle takes one.
Does this Dorman master cylinder include the reservoir and sensor?
Yes, this master cylinder comes with the reservoir and the sensor. Mounting hardware is not included.
What size are the outlet threads on the M39999 master cylinder?
Dorman M39999 has two outlets. The rearward and secondary outlets are both M10 x 1.0, the primary outlet thread pitch is 1 mm, and the bore diameter is 1 in.
What signs can point to a worn aluminum brake master cylinder?
A pedal that sinks or feels soft, or brake fluid leaking at the cylinder, can be signs of wear. If you notice either, have the brakes inspected promptly instead of driving on them.
Are the rubber parts in this master cylinder suited to glycol-based brake fluid?
Yes. All rubber components in this master cylinder are made of an EPDM compound for resistance to glycol-based brake fluid.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.