Dorman - First Stop Brake Master Cylinder P/N:M390296
Dorman M630733 brake master cylinder for the 2010-2012 Ford Fusion and other vehicles turns pedal force into hydraulic pressure for the brakes. This Dorman master cylinder is precision-engineered around the design, function and performance of the original for specific vehicle years, makes and models, and its housing is constructed to match the casting material of the original part for similar performance.
A brake pedal that feels soft or sinks toward the floor, or brake fluid showing around the master cylinder, can mean the unit is wearing out. Before you replace it, rule out a leak at a line, hose or caliper and a low fluid level, since those can produce a similar pedal feel.
This master cylinder fits the 2010-2012 Ford Fusion, the 2010-2012 Lincoln MKZ and the 2010-2011 Mercury Milan, and a single unit is needed for each car.
Fit and size
Build and materials
One master cylinder. The reservoir, sensor and mounting hardware are not included, so plan on new fasteners rather than reusing old ones.
Interchange: 100-2883 · 13-4399 · 10-4399
AE5Z2140A · NM4265 · MC391237 · MC391386 · R144399
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a master cylinder for the 2010-2012 Ford Fusion, including a 2010 model?
Yes, Dorman M630733 fits the 2010-2012 Ford Fusion, and the 2010-2012 Lincoln MKZ takes it as well; each car needs one.
Can this master cylinder go on a 2010-2011 Mercury Milan?
Yes, the 2010-2011 Mercury Milan is on the fitment list for Dorman M630733, and it takes one master cylinder.
Does this Dorman brake master cylinder come with a reservoir or mounting hardware?
No, Dorman M630733 is the master cylinder alone; the reservoir, sensor and mounting hardware are not included.
What bore size and outlet threads does this aluminum master cylinder have?
The bore diameter is 0.875 in. It has two outlets, both M14 x 1.5, with a 1.5 mm thread pitch on the primary outlet.
Are the rubber parts in this master cylinder made for glycol-based brake fluid?
Yes, all of its rubber components are made of an EPDM compound for resistance to glycol-based brake fluid.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.