Dorman - First Stop Brake Master Cylinder P/N:M630441
Dorman M630797 brake master cylinder for the 1968 International 1300C and other vehicles turns pedal force into hydraulic pressure for the brakes. The cast iron housing is built to match the casting material of the original part.
A soft or sinking brake pedal, fluid around the cylinder body or a brake warning light can mean a worn master cylinder, though a leak elsewhere in the brake system can look the same. With the engine off, check the reservoir level and the cylinder body for fluid, and find the cause before replacing the part; a shop can pressure-test the system.
This master cylinder is listed for a wide range of International models, led by the 1968 International 1300C, the 1967 International 1300B and the 1966 International 1200A. If your vehicle is not named here, look up its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One brake master cylinder with its reservoir; each vehicle takes one. Mounting hardware and a sensor are not included, so plan on new mounting hardware rather than reusing the old pieces.
Interchange: 100-4248 · 130.70007 · 355-71006
5461345 · 242768R91 · 261572C91 · 89410R91
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman M630797 master cylinder right for the 1968 International 1300C?
Yes. Dorman M630797 is listed for the 1968 International 1300C, the 1967 International 1300B and the 1966 International 1200A; other years and models are in the "Vehicles it fits" section.
Does the Dorman M630797 come with the reservoir?
Yes, Dorman M630797 includes a single reservoir with the cylinder. Mounting hardware and a sensor are not included.
What is the bore size of this brake master cylinder?
The bore diameter is 1.125 in, and the rearward outlet size is 1/2-20. The cylinder body is cast iron.
Is the rubber in this master cylinder made for glycol-based brake fluid?
Yes. The rubber components are made of an EPDM compound, which resists glycol-based brake fluid.
Does this master cylinder replace number 355-71006?
Yes, 355-71006 is one of the numbers this master cylinder replaces, along with 100-4248 and 130.70007.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.