Dorman - First Stop Clutch Slave Cylinder P/N:CS37793
Dorman CS360014 clutch slave cylinder for the 1993 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles uses hydraulic pressure from the clutch master cylinder to operate the clutch release. This Dorman clutch slave cylinder is a direct replacement, reverse-engineered from original equipment parts.
A leaking or malfunctioning slave cylinder can show up as fluid around the cylinder, a soft or sinking clutch pedal, or trouble getting into gear. Before you replace the slave cylinder, rule out the clutch master cylinder, the hydraulic line and the clutch itself as the source of those symptoms.
It is listed for a wide range of Ford models, including the 1993-1994 Ford F-250 V8 7.3L or 7.5L and the 1993 Ford Bronco V8 5.0L or 5.8L, and every one of them takes a single slave cylinder. If your Ford is not named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
One clutch slave cylinder.
Interchange: S-85008 · 138.65008 · 139.65008
18F146 · S0708 · S0708E · W909173 · 12599 · SC126891 · F3TZ7A564A · 360014 · SH6056 · F126891
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a Ford F-150 clutch slave cylinder for 1993 trucks with the 6-cylinder 4.9L, V8 5.0L or 5.8L?
Yes. Dorman CS360014 is listed for the 1993 Ford F-150 with the 6-cylinder 4.9L, V8 5.0L or 5.8L, and each truck takes one.
Will this Ford F-250 clutch slave cylinder work in a 1993-1994 F-250 with the V8 7.3L or 7.5L?
Yes. This slave cylinder is listed for the 1993-1994 Ford F-250 with either the V8 7.3L or the V8 7.5L engine.
What is the inside diameter of this Dorman slave cylinder?
The Dorman CS360014 has a 21 mm inside diameter. It is an external-type clutch slave cylinder made of aluminum.
Does Dorman CS360014 replace number F3TZ7A564A?
Yes. F3TZ7A564A is on the list of other brands' and original numbers this Dorman CS360014 replaces, along with S-85008 and 138.65008.
Are the rubber parts in this clutch slave cylinder made for brake fluid?
Yes. The slave cylinder is made of aluminum and includes high-grade rubber components for compatibility with standard brake fluid.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.