Dorman - First Stop Clutch Slave Cylinder P/N:CS650231
Dorman CS650035 clutch slave cylinder for the 2002-2003 Nissan Altima V6 3.5L, the 2002-2007 Altima 4-cylinder 2.5L and other vehicles turns hydraulic pressure from the clutch pedal into the motion that releases the clutch. This Dorman slave cylinder is one unit, and the clutch needs just one, so there is no left/right pair to order.
Fluid around the cylinder, a soft or sinking clutch pedal, or a clutch that does not fully release can mean the slave cylinder is worn. Before replacing it, look for wet fluid at the cylinder and its line connection with the engine off. A leak or soft pedal can also start at the master cylinder or the line, and a shop can pressure-test the system. If the slave cylinder is the cause, this part replaces it.
Besides the Altima, it fits the 2002-2006 Nissan Sentra 4-cylinder 2.5L and the 2002 Nissan Maxima V6 3.5L. It is a direct replacement built to match the original clutch slave in these vehicles.
Fit and size
Build and materials
One clutch slave cylinder.
Interchange: 072-9542 · 138.42014
14010 · SC551550 · SC551590 · LSC407 · CS2516 · CS2517 · 306208J200 · 30620AU400 · F140471 · SC140471
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does this Nissan Altima clutch slave cylinder fit the 2002-2007 Nissan Altima 4-cylinder 2.5L?
Yes. Dorman CS650035 fits the 2002-2007 Nissan Altima 4-cylinder 2.5L, and it also fits the 2002-2003 Altima V6 3.5L.
Is this a Nissan Sentra clutch slave cylinder for the 2002-2006 Nissan Sentra 4-cylinder 2.5L?
Yes. Dorman CS650035 fits the 2002-2006 Nissan Sentra 4-cylinder 2.5L. The clutch takes one slave cylinder, and this listing is one.
What is the inside diameter of this Dorman clutch slave cylinder?
This slave cylinder has an inside diameter of 0.75 in. It is an external type, listed as standard replacement grade.
Does the Dorman CS650035 come with a clutch master cylinder or fluid?
No. This listing is one clutch slave cylinder, and the package contains only the cylinder. A master cylinder and brake fluid are separate items.
What fluid goes with the rubber parts in this slave cylinder?
The rubber components are made for compatibility with standard brake fluid.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.