Dorman - First Stop Drum Brake Wheel Cylinder P/N:W93083
$30.99
(You save)
Convert hydraulic pressure into shoe-to-drum force with the Dorman - First Stop Drum Brake Wheel Cylinder W93083. This rear-position drum brake wheel cylinder drops in as a direct-fit replacement for the 1955-1971 Volkswagen Transporter (All), where two are used per vehicle — order 2 to service both rear wheels. Dorman engineered it to line up with the original cylinder's fit, function, and performance on the listed applications, and it is manufactured and tested for quality assurance.
Quality materials: built with high-quality EPDM rubber cups and boots for long-lasting sealing.
Professionally tested: the bore is surface-tested to provide an optimum sealing surface for the pressure cups.
Spec'd to match: cast-iron body with a 0.875 in inside-diameter bore and an M10 x 1.0 inlet thread (10 mm, 1.0 pitch).
Ready to install: includes a bleeder screw; a bleeder screw cap is not included.
Replacing the wheel cylinder while you service the rear drums is a fast, cost-effective way to help keep the hydraulic side of the brakes working properly. If a leaking or seized cylinder is the cause of a soft pedal, fluid behind the drum, or uneven braking, this replaces it. Country of origin: Taiwan.
It uses hydraulic pressure from the brake system to push the drum brake shoes outward against the drum. This W93083 is the rear-position cylinder for the listed VW Transporter applications.
Will it fit my vehicle?
It's a direct-fit replacement for the 1955-1971 Volkswagen Transporter (All). Check the Buyer's Guide tab to confirm it matches your vehicle before ordering.
How many do I need?
The listed applications use two per vehicle, so order 2 to replace both rear wheel cylinders. It's best practice to service both sides together for even braking.
Is a bleeder screw included?
Yes, a bleeder screw is included. A bleeder screw cap is not included. The body is cast iron with a 0.875 in bore and an M10 x 1.0 inlet thread.
What are signs mine may need replacing?
Brake fluid leaking behind the drum, a soft or spongy pedal, or uneven braking can indicate a failing wheel cylinder. Diagnose the cause before replacing, as other parts can produce similar symptoms.
Write a Review
Dorman
Dorman - First Stop Drum Brake Wheel Cylinder P/N:W93083
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and...
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and...
Keep hydraulic pressure moving to your drum brake shoes with the Dorman - First Stop Drum Brake Wheel Cylinder W8807. This wheel cylinder uses the brake system's hydraulic pressure to push its...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
