Dorman 32107 turbocharger stud for the 2013-2020 Ford Escape and other vehicles is an exhaust manifold hardware kit with four studs and four nuts. The studs hold the turbo-to-manifold joint together, and the kit supplies new hardware when studs have fatigued or gone missing.
- Bolt grade 10.9 studs
- M10-1.50 coarse thread, 10 mm in diameter at both ends
- 60.5 mm overall length, with 28 mm of thread on one end and 23 mm on the other
- Four studs and four nuts in one kit for the turbo and exhaust manifold hardware
- Steel and copper construction
Quick facts
- Part: Dorman 32107 turbocharger stud
- Fits: the 2013-2020 Ford Escape and other vehicles
- Material: Steel and copper
- Condition: New
A ticking exhaust leak near the turbo flange, or a stud that is broken, loose or missing, can mean the hardware needs replacing. These signs alone do not prove a stud is the problem; a worn turbo gasket is another common source of an exhaust leak.
Fits
As a direct-fit turbocharger stud kit, it also fits the 2012-2020 Ford Explorer and the 2015-2020 Ford Mustang, among other Ford and Lincoln models.
Specifications
Fit and size
- Thread size: M10-1.50, coarse thread on both ends
- Thread diameter: 10 mm at both ends
- Overall length: 60.5 mm
- Thread length: 28 mm on end 1, 23 mm on end 2
- Hex size: 13 mm
- Pieces: 4 studs, 4 nuts
- Quantity per vehicle: 1 kit
Build and materials
- Material: steel and copper
- Bolt grade: 10.9
- Condition: New
- Country of origin: India
In the box
Four studs and four nuts. This listing is one kit, and the fitment lists one kit per vehicle.
Interchange: W704474S437 · W713095S403
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Will Dorman 32107 fit a 2013-2020 Ford Escape?
Yes. Dorman 32107 is listed for the 2013-2020 Ford Escape. For any other car, look up your year and model in the "Vehicles it fits" section on this page.
How many studs and nuts come in the Dorman 32107 turbocharger stud kit?
The kit holds four studs and four nuts. The fitment lists one kit per vehicle.
What thread size and length are these turbocharger studs?
The thread is M10-1.50 coarse and 10 mm in diameter at both ends. Overall length is 60.5 mm, with 28 mm of thread on one end and 23 mm on the other.
How can I tell if a turbocharger stud has failed?
With the engine off and cool, look for a stud that is broken, missing or loose at the turbo flange, or for exhaust leak marks around the joint. A shop can confirm a leak.
Does the W704474S437 number cross to Dorman 32107?
Yes. W704474S437 is listed as an interchange number for Dorman 32107, along with W713095S403.
