Dorman 03418 turbocharger stud for the 2007-2013 Mazda 3 and other vehicles is a threaded fastener that helps hold the turbocharger in place. This turbocharger stud replaces one that has gone missing or failed from fatigue.
- Steel construction in black phosphate
- Bolt grade 9.8 hardware
- M10x1.5 coarse thread with a 10 mm thread diameter on both ends
- Thread length of 12.7 mm on end 1 and 24.5 mm on end 2
- Three studs and three nuts in each kit
Quick facts
- Part: Dorman 03418 turbocharger stud
- Fits: the 2007-2013 Mazda 3 and other vehicles
- Material: Steel
- Condition: New
A stud that is stripped, rusted, stretched or missing can leave the turbocharger loose on its mount, though a rattle or an exhaust leak near the turbo can have other causes. With the engine off and cool, look over the mounting for missing or damaged studs and measure a suspect stud's thread against the specifications below. A shop can test for leaks before you replace anything.
Fits
It fits the 2007-2013 Mazda 3, the 2007-2012 Mazda CX-7 and the 2006-2007 Mazda 6. This listing is one kit with three studs, and one kit covers each of these cars.
Specifications
Fit and size
- Quantity per vehicle: 1 kit
- Kit contents: 3 studs, 3 nuts
- Thread size: M10x1.5
- Thread diameter: 10 mm on end 1 and end 2
- Thread length: 12.7 mm on end 1, 24.5 mm on end 2
- Hex size: 14 mm
Build and materials
- Material: Steel
- Finish: Black phosphate
- Thread type: Coarse on end 1 and end 2
- Bolt grade: 9.8
- Condition: New
- Country of origin: China
In the box
Three studs and three nuts.
Interchange: L3K913146A
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the Dorman 03418 turbocharger stud fit the 2007-2013 Mazda 3?
Yes. Dorman 03418 is listed for the 2007-2013 Mazda 3, and also for the 2007-2012 Mazda CX-7 and the 2006-2007 Mazda 6.
How many studs and nuts come with Dorman 03418?
Each Dorman 03418 kit has three studs and three nuts. Each vehicle it fits takes one kit.
What thread size is this turbocharger stud?
The thread is M10x1.5 coarse with a 10 mm diameter on both ends. Thread length is 12.7 mm on end 1 and 24.5 mm on end 2.
What are these turbocharger studs made of and what bolt grade are they?
These turbocharger studs are steel in black phosphate, with a bolt grade of 9.8. The hex size is 14 mm.
Does the Dorman 03418 turbocharger stud replace L3K913146A?
Yes. L3K913146A is a cross-reference number for the Dorman 03418 turbocharger stud, which is listed as its replacement.
