Dorman - OE Solutions Differential Ring and Pinion P/N:697-310
Dorman 697-201 rear differential ring and pinion for the 1999-2008 Chevrolet Silverado 1500 and other vehicles turns driveshaft rotation into axle drive. The set is a direct replacement for the original gear set.
Grinding or whining from the rear axle can mean worn gears or bearings, though other axle parts make similar noises. Gear oil seeping at the differential cover is something you can look for with the engine off and cool, and a shop can pin down the cause before the gears are replaced. The rear axle takes one ring and pinion set.
This set fits the 1999-2008 Chevrolet Silverado 1500, and the vehicles it fits include the 1999-2008 GMC Sierra 1500 and the 1999-2008 Chevrolet Tahoe, along with many more. If yours is not named here, find your year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One ring gear and one pinion gear. Shims, an installation kit and mounting hardware are not included, so plan on new fasteners, since the old ones may not be reusable.
Interchange: 742G730F
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman 697-201 ring and pinion right for a 1999-2008 GMC Sierra 1500?
Yes. Dorman 697-201 fits the 1999-2008 GMC Sierra 1500. It is a rear set, so it goes in the rear differential.
Does this 4.56 ring and pinion set include shims or an installation kit?
No. Dorman 697-201 comes as one ring gear and one pinion gear. Shims, an installation kit and mounting hardware are not included.
What axle type and ring gear size does this set have?
The set has a 4.56 gear ratio and a 9-tooth pinion, for a semi-floating axle. The ring gear measures 8.6 in outside diameter and 4.9 in inside diameter.
What noises can a worn rear ring and pinion make?
Grinding or whining from the rear axle can come from worn gears or failed bearings. Gear oil weeping at the differential cover is another sign to watch for.
Does the 742G730F number match this ring and pinion set?
Yes. 742G730F is listed as an interchange number for Dorman 697-201, so you can use it when cross-referencing this set.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.