Dorman - OE Solutions Steering Knuckle P/N:686-340
Dorman 686-312 front right steering knuckle for the 2018-2023 Volkswagen Atlas and other vehicles holds the wheel hub bearing and brake caliper at the front right wheel. This Dorman OE Solutions steering knuckle is made for Volkswagen SUVs where rust can grow between the knuckle and the hub bearing until the two seize together.
A cracked or rust-damaged knuckle, or a hub that seizes in the knuckle during hub replacement, can mean the knuckle needs replacing. Bearing noise or vibration can have other causes, so look the knuckle over with the engine off for cracks, heavy rust or damage near the bearing seat before you order.
It is a direct replacement for the 2018-2023 Volkswagen Atlas and the 2020-2023 Volkswagen Atlas Cross Sport. This listing is one knuckle for the front right; the front left of the same axle is a separate part, and the two are normally replaced together. The vehicles take one on each side of the front axle.
Fit and size
Build and materials
One bare knuckle, one nut and one bolt. The wheel hub bearing and axle are not included, and other mounting hardware is not included, so plan on new fasteners.
Interchange: 3QF407256E
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman 686-312 steering knuckle fit the 2020-2023 Volkswagen Atlas Cross Sport?
Yes. Dorman 686-312 fits the 2020-2023 Volkswagen Atlas Cross Sport and the 2018-2023 Volkswagen Atlas, on the front right side.
Does the Dorman 686-312 knuckle come with the wheel hub bearing?
No. Dorman 686-312 is a bare knuckle supplied with one nut and one bolt; the wheel hub bearing and axle are not included.
What size are the caliper and sensor holes on this steering knuckle?
The two caliper mounting holes are 14 mm in diameter, and the sensor hole is 10 mm.
How does the coating on this OE FIX steering knuckle help?
The patent pending, proprietary coating helps prevent rust from forming between the knuckle and the wheel hub bearing, which are the surfaces that can seize together.
Does 3QF407256E interchange with Dorman 686-312?
Yes. 3QF407256E is listed as an interchange number for Dorman 686-312, a front right steering knuckle.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.