Dorman 541-411 pitman arm for the 1986-1991 Toyota 4Runner and other vehicles connects the steering gear to the center link. Dorman builds it as a direct replacement for a worn or bent pitman arm.
- Steel construction with a coated finish
- 48-spline end for a 30.2 mm steering shaft
- Male taper end with a 14 mm center link attachment diameter and 1.5 mm pitch
- Castle nut and cotter pin come with the arm
Quick facts
- Part: Dorman 541-411 pitman arm
- Also called: steering pitman arm
- Fits: 1986-1991 Toyota 4Runner and other vehicles
- Material: Steel
- Condition: New
Loose steering or alignment problems can mean a steering pitman arm is worn, though the steering gear or the center link can be behind the same signs, so find the cause before you replace anything.
Fits
It fits the 1986-1995 Toyota Pickup, which takes one arm, and the 1986-1991 Toyota 4Runner, which takes one as well.
Specifications
Fit and size
- Quantity per vehicle: 1
- Length: 153 mm
- Steering shaft diameter: 30.2 mm
- Center link end attachment diameter: 14 mm
- Center link end attachment pitch: 1.5 mm
- Spline quantity: 48
Build and materials
- Material: Steel
- Finish: Coated
- End 1 attachment: Spline
- End 2 attachment: Male taper
- Condition: New
- Country of origin: China
In the box
One pitman arm, one castle nut and one cotter pin. A grease fitting is not included.
Interchange: 101-4229 · K-9422
TA2327 · GK9422 · MK9422 · JPA169 · 4540135190 · 4540135220
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-4229, TA2327, K9422, GK9422, MK9422, K-9422, JPA169, 4540135190, 4540135220
Frequently Asked Questions
Is the Dorman 541-411 a pitman arm for the 1986-1995 Toyota Pickup?
Yes. Dorman 541-411 is a direct replacement for the 1986-1995 Toyota Pickup, and the 1986-1991 Toyota 4Runner takes the same arm.
Does the pitman arm come with a castle nut and cotter pin?
Yes. The box holds one pitman arm, one castle nut and one cotter pin. A grease fitting is not included.
What shaft size and spline count does this pitman arm use?
Dorman 541-411 has 48 splines for a 30.2 mm steering shaft. Its male taper end has a 14 mm attachment diameter with 1.5 mm pitch for the center link.
How can I tell if a pitman arm is worn?
Loose-feeling steering, alignment trouble, visible bending or play at the joint with the engine off can mean wear. Have a shop inspect it promptly rather than driving on a worn steering part.
Does Dorman 541-411 interchange with 4540135190?
Yes. 4540135190 is on the interchange list for Dorman 541-411, along with 4540135220 and 101-4229.
