Front Upper Ball Joint for 1987-1993 Mazda B2200 & More - Dorman 533-337

$19.99

Vehicles this part fits

    Part number: 533-337
    UPC: 194883730946
    Condition: New
    Weight: 0.70 LBS
    Item Package Quantity: 1
    $19.99
    Adding to cart… The item has been added

    Have questions?

    Dorman - OE Solutions Suspension Ball Joint P/N:533-337
    Dorman - OE Solutions Suspension Ball Joint P/N:533-337
    $19.99
    $19.99

    Dorman 533-337 front upper ball joint for the 1987-1993 Mazda B2200 and other vehicles connects the control arm to the steering knuckle. This suspension ball joint replaces only the worn joint, so the rest of the assembly stays in place.

    • Part of the Dorman OE Solutions line
    • Steel construction with a polychloroprene dust boot
    • Tapered stud with a castle nut and a hole for the cotter pin
    • Threaded stud, 1/2 in diameter, 1.5 mm pitch, 35.5 mm thread length
    • Greaseable joint

    Quick facts

    • Part: Dorman 533-337 ball joint
    • Also called: suspension ball joint
    • Fits: 1987-1993 Mazda B2200 and other vehicles
    • Position: Front upper
    • Material: Steel
    • Condition: New

    A worn ball joint can show up as a clunk over bumps, loose or wandering steering, or uneven tire wear. Worn control arm bushings, tie rod ends or wheel bearings can be behind those signs as well, so find the cause before buying a new joint.

    Fits

    This is a direct replacement for the 1987-1993 Mazda B2200, the 1987-1993 Mazda B2600 and the 1986-1987 Mazda B2000.

    Specifications

    Fit and size

    • Position: Front upper
    • Quantity per vehicle: 2
    • Stud tapered end 1 diameter: 27.2 mm
    • Stud tapered end 2 diameter: 22 mm
    • Housing press-fit diameter: 45 mm
    • Maximum outside diameter: 61 mm
    • Stud taper per foot: 2 in
    • Stud thread: 1/2 in diameter, 1.5 mm pitch, 35.5 mm long
    • Wrench size: 12 mm
    • Mounting holes: 3

    Build and materials

    • Material: Steel
    • Dust boot material: Polychloroprene
    • Stud: Tapered, threaded, with cotter pin hole
    • Mounting type: Bolt-in
    • Greaseable: Yes
    • Condition: New
    • Country of origin: China

    In the box

    One ball joint, one castle nut, six nuts and six bolts; a bushing is not included. This listing holds one ball joint, and these Mazdas take two at the front upper position, so ordering two lets you fit them together.

    Installation notes

    • A ball joint press tool is normally required for installation.

    Interchange: 101-3895 · 610.45007 · K-9554
    TC588 · FA1786 · 8AU134540 · GK9554 · MK9554 · JBJ439

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    101-3895, 610.45007, TC588, FA1786, K9554, 8AU134540, GK9554, MK9554, K-9554, JBJ439

    Frequently Asked Questions

    Is this the right 1987-1993 Mazda B2200 ball joint?

    Yes. Dorman 533-337 is a front upper ball joint for the 1987-1993 Mazda B2200, and it also fits the 1987-1993 Mazda B2600.

    Does this ball joint come with a castle nut and mounting hardware?

    Yes. The listing includes one ball joint, a castle nut, six nuts and six bolts. A bushing is not included.

    What size is the tapered stud on this Dorman ball joint?

    Dorman 533-337 has a tapered stud measuring 27.2 mm at one end and 22 mm at the other. The thread is 1/2 in in diameter, 1.5 mm pitch and 35.5 mm long.

    How can I tell if a front upper ball joint is worn?

    A clunk over bumps, loose steering or uneven tire wear can be signs of wear. A shop can test the joint for play safely with the vehicle properly supported.

    Do I need a special tool to install this ball joint?

    Yes. A ball joint press tool is normally required to install Dorman 533-337.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review