Dorman - OE Solutions Suspension Ball Joint P/N:539-881
Help keep the front suspension pivoting smoothly with the Dorman - OE Solutions 539-813, a front lower forward 2005-2009 Nissan 350Z ball joint that is also listed for the 2005-2007 Infiniti G35. It is a direct replacement for the 2005-2009 Nissan 350Z and the 2005-2007 Infiniti G35 with all engines.
A ball joint is the pivot between the suspension and the steering knuckle. It lets the wheel travel up and down and turn with the steering. Dorman precision-engineers and rigorously tests this unit to provide a dependable replacement for the original equipment on these vehicles.
Specifications: The threaded, tapered stud has a 16 mm diameter, 1.5 mm thread pitch and 35.5 mm thread length. It tapers at 2 in per foot, from 27.2 mm to 22 mm at its tapered ends. The housing has a 41 mm press-fit diameter and a 61 mm maximum outside diameter. Wrench size is 12 mm, and the stud has a cotter pin hole. This premium-grade part is non-greaseable, has no grease fitting and is not adjustable.
In the box: One ball joint, one castle nut, one retaining ring and one tapered insert. The listed applications use two ball joints, and this package contains one. The ball joint presses into place, and a ball joint press tool is typically required for installation. Country of origin: Thailand.
Interchange: 101-7664 · 610.42000 · 610.42016
1017664 · 61042000 · 61042016 · TC5473 · BJL148 · K500397 · GS30500 · MS30500 · MS30506 · 40015AL850
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this 2005-2007 Infiniti G35 ball joint also fit my 2005-2009 Nissan 350Z?
Yes. It is cataloged in the front lower forward position for both the 2005-2007 Infiniti G35 and the 2005-2009 Nissan 350Z. The "Vehicles it fits" section shows the full fitment.
What comes in the box with this Dorman ball joint?
One ball joint, one castle nut, one retaining ring and one tapered insert. The listed applications use two ball joints per vehicle, so plan your order accordingly.
Can I grease this suspension ball joint?
No. It is a non-greaseable design with no grease fitting. It uses a polymer bearing protected by a polychloroprene dust boot.
How is this ball joint installed?
It is a press-in design with a 41 mm press-fit housing, and a ball joint press tool is typically required. Follow the vehicle service information for procedures and torque values.
What are signs a lower ball joint may need replacing?
Common signs include clunking over bumps, loose or wandering steering, uneven tire wear or a torn dust boot. Have the suspension inspected to confirm the cause before replacing parts.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.