Keep steering tight and the front suspension articulating safely with the Dorman - OE Solutions Suspension Ball Joint 539-881, a front lower ball joint that pivots the lower control arm against the steering knuckle so the wheel can travel and steer. It installs as a direct-fit replacement on the 2003-2008 Nissan Murano, 2017-2023 Nissan Qashqai, 2004-2009 Nissan Quest, 2008-2020 Nissan Rogue, 2014-2015 Nissan Rogue Select, 2017-2022 Nissan Rogue Sport, 2008-2022 Nissan X-Trail, and 2009-2024 Renault Koleos (engine: All). These applications use two, so order a pair to do both sides.
- Steel build, premium grade: steel housing with a polymer bearing and a polychloroprene dust boot, precision-engineered to match the design and dimensions of the original component.
- Mounting hardware included: ships with a retaining ring, nut, and bolt.
- Non-greaseable, non-adjustable: no grease fitting is provided.
- Tapered pinch stud: 20 mm stud thread diameter with a 1.5 mm thread pitch; 12 mm wrench size.
The housing is press-in, so a ball-joint press tool is typically required for installation. Country of origin: Thailand.
Interchange: 45D1442 · 45D2332 · 610.42011 · TC1989 · TC4194 · BJL150 · FA2250 · K500129 · GS30518 · MS30504 · MS30518 · TXMS30518 · 1016007 · JBJ225 · Manufacturer part number 539-881
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What is the Dorman 539-881 and where does it mount?
It is a front lower suspension ball joint that pivots the lower control arm against the steering knuckle, letting the front suspension travel while allowing the wheel to steer.
Which vehicles does it fit?
It is a direct-fit replacement for the 2003-2008 Nissan Murano, 2017-2023 Qashqai, 2004-2009 Quest, 2008-2020 Rogue, 2014-2015 Rogue Select, 2017-2022 Rogue Sport, 2008-2022 X-Trail, and 2009-2024 Renault Koleos. See the Buyer's Guide tab.
Is mounting hardware included?
Yes. It ships with a retaining ring, a nut, and a bolt. A ball-joint press tool is typically required for installation.
Is this ball joint greaseable or adjustable?
No. It is non-greaseable with no grease fitting provided, and it is non-adjustable.
What are signs a ball joint may need replacing?
Clunking or knocking over bumps, wandering or loose steering, and uneven tire wear can be signs. Diagnose the cause first; if a worn ball joint is responsible, this replaces it.
Write a Review