Dorman - OE Solutions Suspension Control Arm Bushing P/N:533-671
Dorman 533-543 front lower control arm bushing for the 2001-2010 Chrysler PT Cruiser and other vehicles cushions the control arm pivot and lets the arm move with the suspension. Some catalogs list it as a suspension control arm bushing.
A clunk over bumps, loose or wandering steering, or uneven front tire wear can mean this bushing is worn, though a ball joint or a tie rod end can be behind the same signs, so find the cause first. The vehicle takes two, one on each side of the front axle, so order two and fit them together.
This control arm bushing is a direct-fit replacement for the 2001-2010 Chrysler PT Cruiser, the 2000-2005 Dodge Neon and the 2003-2005 Dodge SX 2.0. Driving something else? Look up your own car in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm bushing. Mounting hardware, a bracket and a dust boot are not included, so plan on new fasteners, as the old ones may not be reusable.
Interchange: 602.67041
45G9332 · 46G9332A · 4656013 · TD1121W · 12805 · K7472 · FB994 · GK7472 · MK7472 · 5272252 · JBU816
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Neon control arm bushing the right one for a 2000-2005 Dodge Neon?
Yes. Dorman 533-543 fits the 2000-2005 Dodge Neon as the front lower forward bushing, and the car takes two.
Does this PT Cruiser control arm bushing fit the 2001-2010 Chrysler PT Cruiser?
Yes. Dorman 533-543 fits the 2001-2010 Chrysler PT Cruiser in the front lower forward position. If your car is not named here, check the "Vehicles it fits" section.
Does the 533-543 bushing come with bolts or a bracket?
No. The package holds one bushing; mounting hardware, a bracket and a dust boot are not included. Plan on new fasteners, since the old ones may not be reusable.
What size and material is this control arm bushing?
It is rubber and steel, with a 14 mm inside diameter, a 33 mm outside diameter, an 18.4 mm mounting hole diameter and a 69 mm length.
How can I tell a control arm bushing is worn out?
A clunk over bumps, loose steering or uneven tire wear can point to a worn bushing. A shop can check the bushings for play and cracked rubber.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.