Dorman - OE Solutions Suspension Control Arm Bushing P/N:540-854
Dorman 533-854 front lower control arm bushing for the 2018-2025 Toyota Camry and other vehicles lets the control arm pivot and absorbs road shock. With this suspension control arm bushing you replace only the worn bushing, not the complete suspension arm.
A worn control arm bushing can show up as a clunk over bumps or loose steering, and other suspension parts can produce those too, so find the cause before replacing it. Once the old bushing is out, look for split rubber and measure it against the specs below. Both front sides are normally replaced together; this listing is one bushing, and the 2018-2025 Toyota Camry takes two.
This bushing is a direct replacement for a wide range of Toyota and Lexus models. It works as a control arm bushing replacement for the 2018-2025 Toyota Camry, the 2019-2022 Toyota Avalon and the 2021-2025 Lexus ES250, and owners of other models can find their own year in the "Vehicles it fits" section.
Fit and size
Build and materials
One bushing. Mounting hardware and a bracket are not included, so plan on new fasteners rather than reusing the old ones.
Interchange: FB740249 · BU19895 · 4671249
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is Dorman 533-854 a Toyota Camry control arm bushing for 2018-2025 models?
Yes. Dorman 533-854 is a front lower control arm bushing for the 2018-2025 Toyota Camry, and the "Vehicles it fits" section covers the other models.
Will this Toyota Avalon control arm bushing fit a 2019-2022 Avalon?
Yes. This front lower control arm bushing is listed for the 2019-2022 Toyota Avalon, which takes two.
Do I need to buy mounting hardware separately for Dorman 533-854?
Yes. Dorman 533-854 comes as one bushing without mounting hardware or a bracket, so plan on new fasteners.
What is the material and hardness of this control arm bushing?
The material is aluminum with a rubber bushing rated 55-75 Shore A durometer, and it carries a rust-resistant coating.
What should I look for on an old front lower control arm bushing?
Look for cracked or split rubber once it is out, and measure it against the 45 mm outside diameter. A clunk over bumps or loose steering can also be signs of a worn bushing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.