Dorman - OE Solutions Suspension Control Arm Bushing P/N:533-695
Dorman 533-873 front lower control arm bushing for the 2003-2013 Toyota Corolla and other vehicles cushions the control arm pivot. This Dorman control arm bushing, also listed as a suspension control arm bushing, absorbs movement between the arm and the car.
Clunks over bumps, loose or wandering steering, or cracked and torn rubber can mean the bushing has worn. A worn sway bar link, a loose ball joint or a tired strut mount can sit behind similar noises too, so pin down the cause before buying a bushing. This listing is one bushing; the 2003-2013 Toyota Corolla takes two, so order two and fit them together.
It is listed for a wide range of Toyota, Pontiac and Scion models, led by the 2003-2013 Toyota Corolla, the 2003-2014 Toyota Matrix and the 2003-2010 Pontiac Vibe. If your car is not one of those named, look it up in the "Vehicles it fits" section. It is a direct replacement that fits like the original equipment bushing on these vehicles.
Fit and size
Build and materials
One control arm bushing. Mounting hardware, a bracket and a dust boot are not included, so plan on new bolts rather than reusing the old ones.
Interchange: 45G3801 · 46G3801A · K200907 · 1425008 · JBU1846
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is Dorman 533-873 a control arm bushing for the 2003-2013 Toyota Corolla?
Yes. Dorman 533-873 is the front lower rearward control arm bushing listed for the 2003-2013 Toyota Corolla, which takes two.
Is this a control arm bushing for the 2003-2010 Pontiac Vibe?
Yes. Dorman 533-873 is the front lower rearward control arm bushing listed for the 2003-2010 Pontiac Vibe, which takes two.
What are the inside and outside diameters of this bushing?
The inside diameter is 14.2 mm and the outside diameter is 76 mm. The mounting hole diameter is 18.4 mm and the wall thickness is 23.8 mm.
Does this bushing come with bolts, a bracket or a dust boot?
No. The listing is one bushing. Mounting hardware, a bracket and a dust boot are not included, so plan on new bolts.
How can I tell a front lower control arm bushing is worn?
Cracked, torn or split rubber is a visible sign once the part is out. While driving, a clunk over bumps or loose-feeling steering can mean the bushing has worn.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.