Dorman - OE Solutions Suspension Control Arm Bushing P/N:533-995
Dorman 533-884 front lower control arm bushing for the 2017-2024 Jac Sei 2 and other vehicles replaces the worn bushing, not the whole arm. It is a standard replacement grade Dorman control arm bushing, also called a suspension control arm bushing.
A worn control arm bushing can show up as a clunk over bumps, loose or wandering steering, or cracked and torn rubber. Before you replace it, rule out a worn ball joint, sway bar link or strut mount, which can make similar noises. This listing is one bushing, and both sides are normally replaced together.
The vehicles it fits include the 2017-2024 Jac Sei 2, the 2024-2026 Geely GX3 Pro and the 2012-2021 Toyota Prius c. It is a direct replacement that fits and performs like the original equipment bushing on them. Drivers of other cars can find theirs in the "Vehicles it fits" section.
Fit and size
Build and materials
One bushing. These vehicles take two. Mounting hardware, a bracket and a dust boot are not included, so plan on new hardware, since old fasteners may not be reusable.
Interchange: K201351 · GS864152 · MS864152 · 1425015 · JBU2462
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman 533-884 bushing right for the 2017-2024 Jac Sei 2?
Yes. Dorman 533-884 is a front lower rearward control arm bushing for the 2017-2024 Jac Sei 2, and the 2024-2026 Geely GX3 Pro also takes it; owners of other cars can look theirs up in the "Vehicles it fits" section.
Do I get mounting hardware or a bracket with this bushing?
No. Dorman 533-884 is one bushing with no mounting hardware, bracket or dust boot, and a car takes two, so plan on new hardware.
What size is this front lower control arm bushing?
The inside diameter is 21.2 mm and the outside diameter is 60.3 mm. It is 62 mm long, with an 18.4 mm mounting hole diameter and 62.8 mm between the mounting holes.
Can I replace just the bushing instead of the whole control arm?
Yes. This control arm bushing is sold on its own, so a worn bushing can be replaced without buying a complete arm.
What is this control arm bushing made of?
Dorman 533-884 is made of rubber and steel and has a rust-resistant coating.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.