Dorman - OE Solutions Suspension Control Arm Bushing P/N:540-854
Dorman 540-129 front lower inner control arm bushing for the 2010-2015 BMW X1 and other vehicles cushions the pivot where the control arm attaches to the vehicle. Also listed as a suspension control arm bushing, it lets you replace just the worn bushing instead of the complete control arm.
A worn bushing can show up as a clunk or rattle from the front suspension, a loose or wandering steering feel, or cracked and torn rubber. Ball joints, struts, sway bar links and other bushings can be behind these signs too, so find the cause before buying. This listing is a single bushing, and the one on the opposite side is normally replaced at the same time.
This direct-replacement bushing fits the 2010-2015 BMW X1, the 2009-2013 BMW 328i xDrive and the 2009-2013 BMW 335i xDrive, and the fitment lists a quantity of one for each application. To check your exact model and engine, open the "Vehicles it fits" section.
Fit and size
Build and materials
One bushing. Mounting hardware, a bracket and a dust boot are not included, so plan on new hardware, since the old pieces may not be reusable.
Interchange: 31126768991 · TD1718W · BU19482 · K201171 · MS104240 · 2673850
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman 540-129 the right 2010-2015 BMW X1 control arm bushing?
Yes. Dorman 540-129 is a direct replacement for the 2010-2015 BMW X1, and it also fits the 2009-2013 BMW 328i xDrive. Use the "Vehicles it fits" section to check your exact model.
Does the Dorman 540-129 bushing come with bolts or a bracket?
No. Mounting hardware, a bracket and a dust boot are not included; the package holds one bushing. Plan on new hardware, since old fasteners may not be reusable.
What are the inside and outside diameters of this control arm bushing?
The inside diameter is 12.2 mm and the outside diameter is 60 mm. The mounting hole diameter is 18.4 mm, and the bushing is 66.2 mm wide.
Is this Dorman 540-129 control arm bushing made of rubber or steel?
Both. Dorman 540-129 is built from steel and rubber, and it has a rust-resistant coating.
Is 31126768991 an interchange number for Dorman 540-129?
Yes. 31126768991 is one of the numbers this bushing replaces; the rest are on the Interchange line of the description.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.