Dorman - OE Solutions Suspension Control Arm P/N:520-420
Keep the front end of your pickup properly located with this Dorman control arm, part number 520-363, a front lower arm built as a direct replacement for the 2000-2002 Dodge Ram 2500 and 2000-2002 Dodge Ram 3500. See the Buyer's Guide tab for full application details.
The lower control arm links the front wheel assembly to the chassis. It lets the suspension travel up and down while holding the wheel in position. Dorman precision-engineered and tested this front lower unit to fit and perform like the original equipment, so it installs in place of a worn or damaged arm.
Shopping for Ram 2500 control arms? Signs a lower arm may need replacing include clunking over bumps, loose or wandering steering, uneven tire wear, and a bent, cracked or corroded arm. These symptoms can have other causes, so inspect the suspension before replacing parts. Consult the vehicle service information for the correct fasteners and torque values, and have the wheel alignment checked after installation.
Interchange: 52106778AA · CA4261 · CK620247 · K620247 · RK620247 · FA4487 · GS25127 · CMS25127 · 2605591 · 13CB25060 · SK520363 · JTC2347
This part cross-references / interchanges with the following part numbers:
Which trucks does this Dorman lower control arm fit?
It is a direct-fit replacement for the 2000-2002 Dodge Ram 2500 and 2000-2002 Dodge Ram 3500. See the Buyer's Guide tab for full application details.
What does a suspension control arm do?
It connects the wheel assembly to the chassis, letting the suspension travel up and down while keeping the wheel located. This part is the front lower arm.
Where does this control arm install?
It installs in the front lower position. Consult the vehicle service information for the correct procedure, fasteners and torque values.
What are signs the control arm may need replacing?
Clunking over bumps, loose or wandering steering, uneven tire wear, or a bent, cracked or corroded arm. Inspect the suspension first, since these signs can have other causes.
Should I get an alignment after installing it?
Yes. Replacing a control arm can change suspension geometry, so a wheel alignment is recommended after installation.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.