Dorman - OE Solutions Suspension Control Arm P/N:520-292
Dorman 520-462 front right lower control arm for the 2002-2010 Lexus SC430 and other vehicles links the front right wheel assembly to the vehicle's frame and lets the suspension move. It is a direct replacement for the original equipment on specific vehicles.
A clunk over bumps, uneven tire wear or a steering pull can mean a worn arm or bushing. Those signs alone do not prove this arm is the problem, since a worn tie rod end can cause similar ones.
Vehicles it fits include the 2002-2010 Lexus SC430, the 1998-2005 Lexus GS300 and the 2001-2005 Lexus GS430, one arm per car at the front right lower forward position. Driving another Lexus that is not named here? Look up its year and model in the "Vehicles it fits" section. This listing is one arm; the front left is a separate part, and both sides are normally replaced together.
Fit and size
Build and materials
One control arm with its rubber bushing. The ball joint, mounting hardware and grease fitting are not included, so plan on new fasteners because the old ones may not be reusable.
Interchange: 102-5783
TC5986 · CA4178 · 1CB86044 · RK640409 · GS86102 · CMS86102 · 2605810 · 4806830290 · 4806830300
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does this 1998-2005 Lexus GS300 control arm fit the front right side?
Yes. Dorman 520-462 is a front right lower forward arm that fits the 1998-2005 Lexus GS300.
Is this 2002-2010 Lexus SC430 control arm also usable on the left side?
No. Dorman 520-462 is made for the front right lower position of the 2002-2010 Lexus SC430, and the left side is a separate part.
Does this Dorman lower control arm come with a ball joint?
No. The listing is one cast iron arm with a rubber bushing; the ball joint, mounting hardware and grease fitting are not included.
What size is the bushing in this Dorman suspension control arm?
The rubber bushing measures 39.6 mm outside diameter, 14.3 mm inside diameter and 92 mm long. The arm itself is 262.5 mm long.
What signs can point to a worn bushing on a control arm like this one?
A clunk over bumps, uneven tire wear or a steering pull can be signs of a worn arm or bushing. A shop can inspect the suspension to confirm the cause.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.