Dorman - OE Solutions Suspension Control Arm P/N:520-367
Help keep the front wheel properly located and your Volvo tracking steadily with the Dorman control arm, part number 520-549, a front left lower replacement for the 2001-2007 Volvo S60 and 2001-2007 Volvo V70. This Dorman lower control arm connects the front wheel assembly to the vehicle's chassis, holding the wheel in position while letting it move up and down as the suspension travels. See the Buyer's Guide tab for engine-specific application details.
Several signs may mean this Dorman suspension control arm is due for replacement: clunking over bumps, steering wander, vibration, or uneven tire wear. Other front-end parts can cause the same symptoms, so diagnose the cause first. If the original front left lower arm is at fault, this unit replaces it. After installation, have the wheel alignment checked. Consult the vehicle service information for the correct fasteners, torque values, and whether the original fasteners may be reused.
Interchange: 102-6044 · 622.39810
1026044 · 62239810 · TC1542 · CA8357 · 4CB10057 · RK640368 · FA4566 · GS10118 · CMS10118 · 2605672 · SRK640367 · 1527005 · JTC2638 · 30635229 · 30635230 · 30736378 · 31387923 · 36012457 · 36051002 · 8649543 · 8649544
This part cross-references / interchanges with the following part numbers:
Which vehicles does this 2001-2007 Volvo S60 control arm fit?
It is a direct-fit replacement for the 2001-2007 Volvo S60 and 2001-2007 Volvo V70. See the Buyer's Guide tab to confirm your exact vehicle.
Which position does Dorman 520-549 install in?
It is cataloged for the front left lower position on the listed applications.
What does a lower control arm do?
It connects the front wheel assembly to the vehicle's chassis. It keeps the wheel located while allowing it to move up and down as the suspension travels.
What are signs this control arm may need replacing?
Signs include clunking over bumps, steering wander, vibration, or uneven tire wear. Other front-end parts cause similar symptoms, so diagnose the cause before replacing it.
Is a wheel alignment needed after installation?
Replacing a control arm can change front-end geometry, so an alignment check afterward is recommended. Follow the vehicle service information for fasteners and torque values.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.