Dorman - OE Solutions Suspension Control Arm P/N:520-319
Dorman 520-580 front right lower control arm for the 2005-2014 Volkswagen Jetta and other vehicles connects the wheel to the vehicle and lets the suspension move. This Dorman suspension control arm is a direct replacement for the original equipment on specific vehicles.
A worn front lower control arm can show up as a clunk over bumps, a steering pull or wander, uneven tire wear, or cracked or torn bushings. A worn ball joint, sway bar link, strut mount or tie rod end can be behind those same signs, so find the actual cause before you buy.
It also fits the 2010-2014 Volkswagen Golf and the 2008-2015 Seat Altea XL. If your car isn't named here, look it up in the "Vehicles it fits" section. This listing is one arm for the front right; the front left is a separate part, and both sides of that axle are normally replaced together.
Fit and size
Build and materials
One control arm with its bushings. This listing holds one arm, and the front right position takes one. The ball joint, mounting hardware and grease fitting are not included, so plan on new bolts.
Interchange: 102-6271
TC2142 · CA14364 · 5CB70021 · RK620142 · GS20478 · CMS20478 · 2607190 · SK520580 · 1526002 · X52CA4381 · 1K0407152AC · 1K0407152AD · 1K0407152M · 1K0407152R
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this VW Jetta control arm fit a 2005-2014 Volkswagen Jetta?
Yes. Dorman 520-580 is the front right lower control arm for the 2005-2014 Volkswagen Jetta. The left side of the axle takes its own arm.
Is this Golf control arm right for a 2010-2014 Volkswagen Golf?
Yes. This front right lower control arm is for the 2010-2014 Volkswagen Golf, so the left side needs a separate arm.
Does this Dorman control arm come with bushings?
Yes. Dorman 520-580 includes its rubber bushings. The ball joint, mounting hardware and grease fitting are not included.
What size is the bushing on this control arm?
The bushing measures 14.3 mm inside diameter and 39.6 mm outside diameter, and it is 92 mm long. End 2 of the arm is a press-in type.
How can I tell if my front right lower control arm or its bushings are worn?
Cracked or torn rubber, a clunk over bumps and uneven tire wear are possible signs. A shop can check the joints and bushings for play.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.