Dorman 520-650 front right lower control arm for the 1997-2001 Honda CR-V links the wheel assembly to the body and lets the suspension move. The Dorman control arm replaces the original arm directly and includes rubber bushings.
- Dorman OE Solutions control arm in standard replacement grade
- Steel arm with a powder-coated finish
- Rubber bushings included with the arm
- Casting/forged arm type with a press-in second end
- Tested by product and quality engineers for passenger safety
Quick facts
- Part: Dorman 520-650 control arm
- Also called: suspension control arm
- Fits: 1997-2001 Honda CR-V
- Position: front right lower
- Material: steel
- Condition: New
A worn arm or bushing can show up as a clunk over bumps, loose steering or uneven tire wear. A worn ball joint, tie rod end or strut can be behind those signs too, so find the cause before buying an arm.
Fits
Dorman 520-650 is a direct replacement for the 1997-2001 Honda CR-V. The car has one arm on each side of the front axle; this listing is the front right, the front left is ordered separately, and the two sides are normally replaced together.
Specifications
Fit and size
- Position: front right lower
- Quantity per vehicle: 1 for this side
- Length: 262.5 mm
- Bushing outside diameter: 39.6 mm
- Bushing inside diameter: 14.3 mm
- Bushing length: 92 mm
Build and materials
- Control arm type: casting/forged
- Material: steel
- Finish: powder coated
- Bushing material: rubber
- Second end type: press in
- Condition: New
- Country of origin: Taiwan
In the box
One control arm with its rubber bushings. The ball joint, grease fitting and mounting hardware are not included; plan on new bolts, because the old ones may not be reusable.
Interchange: 102-4804 · 623.40840
TC5537 · CA16148 · 51350S10A00 · 5CB60059 · RK640324 · GS20115 · CMS20115 · 2605388 · SRK640324 · X17CA0621 · JTC7536
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
102-4804, 623.40840, TC5537, CA16148, 51350S10A00, 5CB60059, RK640324, GS20115, CMS20115, 2605388, SRK640324, X17CA0621, JTC7536
Frequently Asked Questions
Is this a 1997-2001 Honda CR-V control arm for the front right side?
Yes, Dorman 520-650 is the front right lower control arm for the 1997-2001 Honda CR-V; the front left side is a separate part.
Does the Dorman lower control arm come with bushings?
Yes, Dorman 520-650 comes with its rubber bushings, but the ball joint, grease fitting and mounting hardware are not included.
Is the Dorman suspension control arm powder coated?
Yes. This arm is steel with a powder-coated finish and rubber bushings.
How can I tell if the bushings on this arm are worn?
With the engine off and cool, look for cracked or torn rubber and rust on the arm. A clunk over bumps or uneven tire wear in normal driving can also point to wear; a shop can check for play.
What size are the bushings on this control arm?
The bushing measures 39.6 mm outside diameter and 14.3 mm inside diameter, and it is 92 mm long. The whole arm is 262.5 mm long.
