Dorman - OE Solutions Suspension Control Arm P/N:521-707
Dorman 521-849 rear left lower control arm for the 2007-2017 Chevrolet Equinox and other vehicles connects the rear left wheel to the body. This Dorman control arm includes its bushings, which saves time and labor where it applies.
A clunk over bumps, uneven rear tire wear or cracked bushings can mean a suspension control arm is worn. Worn shocks, springs or a rear wheel bearing can be behind these signs too, so find the cause before you buy.
This arm is a direct replacement for the 2007-2017 Chevrolet Equinox, the 2010-2017 GMC Terrain, the 2008-2015 Chevrolet Captiva Sport and other vehicles. If yours is another model, open the "Vehicles it fits" section and match your exact model and engine. This listing is one arm for the rear left, the other side of that axle takes its own, and both are normally replaced together.
Fit and size
Build and materials
One control arm with its bushings. A ball joint, mounting hardware and a grease fitting are not included, so plan on new bolts.
Interchange: TC7437 · CA8714 · 15146385 · 20763134 · 20763136 · 20830782 · 25865458 · RK641647 · RK643188 · GS50159 · CMS50159 · 2606463 · 8CB50108
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right Chevy Equinox control arm for a 2007-2017 Chevrolet Equinox?
Yes. Dorman 521-849 is listed for the 2007-2017 Chevrolet Equinox as the rear left lower arm. For another model, open the "Vehicles it fits" section and check your exact model and engine.
Is this a GMC Terrain control arm for a 2010-2017 GMC Terrain?
Yes. Dorman 521-849 is listed for the 2010-2017 GMC Terrain in the rear left lower position. The rear right side takes its own arm.
What comes with the Dorman OE Solutions control arm?
Dorman 521-849 comes as one control arm with its bushings. A ball joint, mounting hardware and a grease fitting are not included, so plan on new bolts.
What is the Dorman lower control arm made of?
The arm is steel with a powder-coated finish, and its bushings are rubber. It is a boxed-style arm with a press-in end 2.
How can I tell if a rear lower control arm is wearing out?
A clunk over bumps, uneven rear tire wear or cracked, torn bushings can be signs. A shop can inspect the arm and test the suspension safely.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.